SpoolHook
This object is currently under review. We cannot guarantee its printability just yet but this object is shareable and people with this link will be able to see and download it. If you would like to help us guarantee the printability of this object, please upload a picture of it printed.
SpoolHook
Published 2018-08-31T16:06:52+00:00
I have two versions of the same part. Both should be easy and fast to hang on existing
shelves. I designed it so it can be hooked ANYWHERE. You should not have problems,
I designed so it will not interfeer with any spool on the shelve.
Most important, it will not try to twist the wood so no extra force
will be added to your brakets.
Just hook and go.
Simple version should be easy to print, no supports, one pice, and should be strong
enough to hold anything you put on it.
V2 has a lock mechanism just in case the Simple version has a balance problem and falls
without a spool. This requires some assembly, M4 screw and locknut, and a rubber band.
Optional I've designed pin to replace the M4 screw.
My printer is to small to print this, and nothing was tested.
Designed to be printed with 0.2 layer height.
Date de publication | 31/08/2018 |
Technologie | FDM |
Complexité | Easy |
ok