Square Vase, Cup, And Bracelet Generator
Square Vase, Cup, And Bracelet Generator
3D
Published 2017-03-10T14:10:59+00:00
Let your imagination run wild stacking squares. With essentially an infinite number of choices in the customizer you can be assured no one will have an object just like your's. By changing the dimensions you can make planters, trays, bud vases, pencil holders, bracelets, or drinking glasses. The simpler smaller objects make good demonstration pieces and will print quite quickly.
Update: Moved max layers from 200 to 800. Careful with the higher layers it could result in long renders. Also added a control to force the design to be hollow if you can't do it in your slicer.
Run the customizer and choose your parameters and export the STL. Be careful to avoid large overhangs. It is quite possible to use the customizer to create something unprintable. When slicing specify no fill and no top layers. Once you print it, be sure to upload a photo. I'm curious to see what people end up with. I have several other vase customizers with variations on this theme. Check out the "Derived from" to see the other versions.
There is a new control called "Force Hollow". This will create a hollow STL for those who can't make the object hollow with their slicer software. Vase produces an STL with only a bottom. Bracelet produces an STL with no top or bottom. The walls are 2mm thick so this may or may not slice nicely depending on your nozzle diameter and layer width. Most should get at least two layers though. It is still best to make the object hollow using your slicing program (instead of the new option) since it will give you best control over the wall thicknesses.
| Date de publication | 10/03/2017 |