Standalone 2KG 3D Printer Filament Spool Holder
$5.00 Standalone 2KG 3D Printer Filament Spool Holder
3D
Published 2020-08-27T18:10:16+00:00
Recently I had to use a 2KG spool of ABS for my QIDI TECH printer, which can not mount a spool so big. So, I got creative.
I designed a quick and simple 2KG spool holder that doesn't need any additional parts or assembly--just put the bar through the spool, and then seat the bar on the arms of the holder. Then sit on a flat surface. Super simple
Holds spools up to 21cm in diameter and 15cm wide.
No supports needed; I printed mine in 20% infill in PLA and seems to be holding up just fine. Print as oriented in the file.
There's three files in the download; one is the rack, and the other is two variants of the bar. The first is the bar as a whole single print, if you have a printer that can print to a height of 19.9cm; otherwise, print the 'split' version of the bar (you'll have to glue the two sides together.
You will, however, need a minimum print area of 17.3cm x 8.9cm x 14cm to print the single-piece rack
Print with minimum 20% infill. Don't use PLA if spool will be in a heated environment, as the PLA will soften and the bar will warp. (External use, PLA is fine)
Print as oriented in the files; no support needed.
You will need a print bed with a minimum volume of 17.3cm x 8.9cm x 14cm to print this (for the single-piece rack)
| Date de publication | 27/08/2020 |
| Price | $5.00 |
| Dimensions | 17.3cm x 8.9cm x 14cm |
| Sans support | YES |