Star Realms 3set box
Star Realms 3set box
3D
Published 2015-09-23T11:20:42+00:00
This is a deck box for a set of three star realms sets and a few extra cards, so that way you can accomidate 2-6 players.
If you only have two sets this will be plenty of room to hold your two sets and many of the booster expansions. Of course you could just use this as an organizer box for any other card game as well.
I used .2mm layer height and was happy with it, but the lip edges of the box features fillets so the finer you go the nicer those will be. .8mm wall thickness or two wall layers with a .4mm nozzel. 20% infill is what i used, but that is really a subjective setting. overall it is a fairly simple print, thou you will need to practice good surface adhesion. I have left plenty of internal box height for the cards to combat some corner lift, but too much and you're going to have a bad time.
| Date de publication | 23/09/2015 |
| Durée d’impression | 1200 - 1320 minutes |
| Quantité de filament | 246 grams |
| Dimensions | 140mm x 86mm x 97mm |
| Technologie | FDM |
| Complexité | Easy |