Surprise Egg #4 - Tiny Excavator
Surprise Egg #4 - Tiny Excavator
3D
Published 2017-12-18T15:11:38+00:00
Stresstest your 3D Printer by printing this tiny collectable stocking stuffer.
Both the excavator and the egg was each designed to be printed in place without any support structures. The excavator has rotatable wheels, liftable arm and articulated bucket and rotatable body. The egg is hinged
Subscribe or follow me on:
Instagram: www.instagram.com/agepbiz
YouTube: www.youtube.com/user/agepbiz
Twitter: www.twitter.com/agepbiz
Homepage: www.agep.biz
Surprise Egg #1 - Tiny Haul Truck
https://www.myminifactory.com/object/3d-print-surprise-egg-1-tiny-haul-truck-34247
Surprise Egg #2 - Tiny Fork Lift:
https://www.myminifactory.com/object/3d-print-surprise-egg-2-tiny-fork-lift-48762
Surprise Egg #3 - Tiny Wheel Loader Toy:
https://www.myminifactory.com/object/3d-print-surprise-egg-3-tiny-wheel-loader-toy-50043
Surprise Egg #5 - Tiny Fire Truck:
https://www.myminifactory.com/object/3d-print-surprise-egg-5-tiny-fire-truck-57483
Surprise Egg #6 - Tiny Jet Fighter:
https://www.myminifactory.com/object/3d-print-64317
Best regards
Stian
WARNING: CHOKING HAZARD - Small parts
Not for children under 3 yrs.
No raft
No support
0,1mm layer
3 walls
40% infill
| Date de publication | 18/12/2017 |
| Sans support | YES |
Printed on Anycubic Chiron at 125% scale using Hatchbox PLA. Couldn’t get it to work at 100% with the .4mm nozzle. I haven quite dialed the Chiron in so I want to try again with the .3mm nozzle of the Kossel Linear+. Printed without supports even though I noticed two long thin parts of the egg would be printed in the air, not sure how any printer could do that, but he said no supports so I did it anyway. You can see some of the burnt PLA inside the egg. On the excavator, you can see a part of the bumper came loose in the beginning, didn’t notice until it finished. I also had to pry the egg open with a screwdriver, but once broken loose it operates smooth. Everything on the excavator functions smooth, tires are a little too loose, however. Excavator fits inside the egg perfectly, after trimming the strands from the parts printed in air, and removing the skewed bumper from the excavator. I also printed it using the Anycubic Photon, but it all fused together. All in all, very cool. I might bump the scale up to 200%-300% and print them for my nephew who loves construction equipment. Thanks buddy.