Terengganu Drawbridge - Malaysia
Terengganu Drawbridge - Malaysia
3D
Published 2020-09-07T07:58:27+00:00
Welcome to Malaysia!
This model was created by MiniWorld 3D collaborator Zuknaini "Izu" Mohd Sabri, aka Tinkerzonchannel.
The Kuala Terengganu Drawbridge is the first bascule bridge built in Malaysia and Southeast Asia, constructed between August 2014 and mid-2019.
Its design was inspired by the Tower Bridge in London. It has a 23-metre-wide single-carriageway that spans 638 metres over the mouth of Terengganu River. It has a 12.5 metre clearance above water when the double-leafed span is closed. The clear span of the drawbridge is 50 metres long. There are four 15-storey towers, with each set of two towers connected by a skybridge. The towers contained with lobbies that allow visitors to go up to the commercial areas located at the skybridges. At night, the structures are lit up with colourful illuminations (from Wikipedia).
MiniWorld 3D is excited to bring this model to life as a homage to all people of Malaysia. Please give credit, it's all about spreading culture and education!
Be sure to follow MiniWorld and Tinkerzonchannel!
instagram.com/tinkerzonchannel/
MiniWorld 3D is a collective of 30+ artists creating the best library of 3D printable models of landmarks of the world!
Print photos by Tinkerzonchannel.
Real location photo by Mosafir Photography
| Date de publication | 07/09/2020 |
Stunning model, it turned out beautifully. 3D printed on a Prusa i3 MK3S using EcoPLA silver by 3DJake. Settings: 0.2mm layer height, 45mm/sec print speed (25mm/sec for upper part). Print time 9 hours. Thank you.