Tree drinkcoaster
Tree drinkcoaster
Published 2020-09-04T11:05:16+00:00
This is a drinkcoaster with a tree image.
I have printed this model in multi-color, with a single extruder. It is also possible to print this model with one color!
This is a standard size coaster (100 by 100 by 5 mm), to fit in my coasterholder:
https://www.thingiverse.com/thing:3130397
Made with love by:
Raimon of IdeaLab
I have printed this model in Fillamentum concrete grey and Fillamentum magenta PLA. I have used 0.25mm layer height and 18% infill. I have used a heated bed at 55 degrees Celsius and my nozzle size is 0.4mm and was heated at 210 degrees Celsius. I have used a brim to ensure adhesion to the build plate. I have used the movement setting: 'combing not in skin' (Cura) for a smoother topsurface. I paused the print at the point when the tree image begins, changed filament, and resumed the print. Don't worry to use your own settings while this isn't a difficult model.
| Date de publication | 04/09/2020 |
| Durée d’impression | 129 - 130 minutes |
| Quantité de filament | ~ 24 gram |
| Dimensions | 0mm x 0mm x 0mm |
| Sans support | YES |