Seated Viking Oarsmen For Warships
Seated Viking Oarsmen For Warships
3D
Published 2019-12-09T19:03:38+00:00
These two fellows wearing typical noseguard helmets are the first in a number of seated oarsmen who, together with a standing coxwain make up the crew of a Viking Warship. I originally designed them to populate the small 24-seater in my other post. But, theoretically, you could also populate a 64-seater like Olaf Tryggvason's famous Long Worm, were such a model to exist. Full size is 1:72 scale so they are pretty small.
Each pair consists of a left hand and right hand version of the same oarsman (I found it helps to print them in pairs to keep track of when populating a boat). The pairs are easily printed out in 30 minutes using a 0.4mm nozzle and 0.15mm layers. For more detail, use higher resolution but that will increase the printing time to about 90 minutes per pair. Supports are necessary for the legs if you print them out lying on their backs.
Update: 06.05.2020: Have added re-scaled versions now that are slightly smaller - the originals would have stood up at 1.8-1.9 metres tall at 1:72 scale. These well-fed giants sometimes had trouble fitting into some of the seats at the narrow ends of their warships.
The examples in the pictures were printed out using 0.15mm layers and 0.4mm nozzle on an Ultimaker 2+. This is quick and dirty printing, averaging 20 minutes per pair. Results using a smaller layer size/nozzle or a resin printer should be better.
| Date de publication | 09/12/2019 |