Typewriter Guy
$5.00 Typewriter Guy
3D
Published 2019-01-22T10:55:24+00:00
This is a model I made of the Typewriter Guy from Sesame Street. I have very fond memories of this little fellow, and I figured I wouldn't be the only one, so I decided to make him to print out :)
Included in the download:
-Single body print for single colour
-STL's for MMU print (one of each piece to then be assembled)
-Fusion360 source file in case you need to make adjustments
I have included a 0.2mm clearance around all the fitted parts for this model, but if they are not sufficient for your printer, you can easily adjust them using the Fusion 360 file. I chose 0.2mm as most people with filament printers tell me that seems to be a good setting. I only have a resin printer, so I can't test myself in such a way.
The pictures of the MMU Print have come from a twitter user by the name of @berd_3d. The red resin print was done by myself using the single piece file.
Supports will be needed for the single piece print. I used some under the main body, hands wheel stems, and arms/hands and it printed fine. I'm not sure of the settings that were used for the MMU print, but I will see if I can find them out and add them if I can.
At 100% scale, you should be able to use a piece of 1.75mm filament for the eye pupils rather than having to print them. If you scale it up, obviously printing them will be required.
| Date de publication | 22/01/2019 |
| Price | $5.00 |