Wacky Circles Puzzle
$1.00 Wacky Circles Puzzle
3D
Published 2018-11-17T12:42:20+00:00
**Now includes individual piece files!**
This puzzle is the basic shape of a square, but different from other puzzles I've made. It has 14 circles, in two different sizes. Those circles are then connected together with straignt lines. It has a total of 23 pieces.
The puzzle prints in place, as with my other puzzles, at a size of 100mm x 100mm.
Once it's done printing, you can quickly clean up the edges from strings and such with a hobby knife or a sharp instrument.
The frame it comes with is very minimal. The walls are only 1.5mm thick, and the bottom is only 0.8mm. But it's plenty to hold a puzzle together and display it if you wish to do that.
I printed everything at 5% infill. The pieces are small enough for a little infill to be sufficient, plus its not load-bearing. The frame is thin enough that it doesn't even take infill.
Printed at 0.2mm layer height, at 60mm/s on my CR-10.
Times to print; material amount
- Puzzle - 2 hours, 18 minutes; ~26g
- Frame - 1 hour, 3 minutes; ~14g
| Date de publication | 17/11/2018 |
| Price | $1.00 |
| Durée d’impression | 120 - 121 minutes |
| Quantité de filament | ~40g total |
| Dimensions | 100mm x 100mm x 5mm |
| Sans support | YES |