Wingspan Egg Tray / Egg carton
Wingspan Egg Tray / Egg carton
Published 2020-03-20T09:40:11+00:00
Egg tray for Wingspan
I made this just for fun and as I wanted to get better at using Fusion 360. I am not sure that there are any good use for it :)
It can stay open by it self. And there are working taps to keep it fully closed.
To make the hinge, you will need some 2mm aluminium crafting wire like this:
https://www.aliexpress.com/item/32904289414.html?spm=a2g0o.productlist.0.0.4a8d353dTVZEaq&algo_pvid=90f42e0b-a2b2-498f-bd58-a048e39f40b8&algo_expid=90f42e0b-a2b2-498f-bd58-a048e39f40b8-0&btsid=0ab50a5715843761630173859e070b&ws_ab_test=searchweb0_0,searchweb201602_,searchweb201603_
Have fun!
Both parts are, in my experience, best printed with the Bottom layer count set to, at least 10
The bottom part needs support with an overhang of 80%, and can be printed with no infill.
Date de publication | 20/03/2020 |
Sans support | YES |
Love it!