Fallout 4 Automatic laser rifle.
Fallout 4 Automatic laser rifle.
3D
Published 2016-11-10T10:05:38+00:00
Hey all.
I recently did a fully funtional automatic laser rifle build based on an Arduino and sound board. Here are the .STL files along with a netfabb file showing the location of all tha parts/assembly. In short this isnt perfect but you should be able to build it with a removable stock. Please refer to the screenshots for screw and bolt alignment.
Print the SPINE and handle solid, acetone weld it together, then everything else with largest honeycomb infill. Best with 3 shell layers.
FYI part tolarances are not good :)
Slice and print the SPINE parts (offset for strength) then acetone weld it together.
Print the HANDLE and Stock then acetone weld them together.
Print the Rear barrel cap and rear connector, push the connector part of the way inside the barrel cap and acetone weld them together.
Print x13 wire clip 2 and x2 wire clip 1.
*Edit 16/11/2016 Issue fixed with Stock cover final.stl. Download from here:
https://www.dropbox.com/s/rt19nr79p8aruq3/stock%20cover%20final%20%28repaired%29.stl?dl=0
| Date de publication | 10/11/2016 |
| Technologie | FDM |