Full Spectrum Dominance
Created by
-
$ 33,750
raised
-
672
pioneers
Campaign Closed: Mon, February 13, 2023 at 03:00 AM GMT
- Pledges (2)
- Add-ons (1)
-
$33,750.02
raised
-
672
pioneers
Tiers
362 pioneers
USD 95.00
The Tech - Calliphon mainframe
This model represent the "Mainframe" objective marker for some of the Full Spectrum Dominance scenarios. But it's so much more than that!
This model is included in The Tech Army Bundle - with loads of other stuff more! A full playable faction for FSD!
It also includes four spider robot feeders and two spider robot cleaners ready for new and unexpected uses!
The models are provided as .stl files and are PRE-SUPPORTED. They have been extensively tested at 6mm scale. We strongly recommend to use ChiTuBox as a slicer for these files.
Scattered Crates
This set contains six unique crates that have been dropped from the sky a bit too early!
Perfect as objective markers for any small-scale game, and designed for the "Scavenging Run" scenario of Full Spectrum Dominance!
The models are provided as .stl files and are PRE-SUPPORTED. They have been extensively tested at 6mm scale.
The models can be easily upscaled to 10mm (150%) and to 15mm (240%, but we recommend re-supporting).
Full Spectrum Dominance - Rulebook
psst! Check out the currently running Full Spectrum Dominance campaign! We have miniatures and terrain, and the manual is included!
This product contains the core rulebook and accessories for Full Spectrum Dominance .
- The full PDF rulebook
- Playable cards for four factions
- Victory cards
- Quick Reference Sheet
- Bases of different sizes (better to use laser-cut ones or plastic, but it's always an option)
Check out our 3d printable models on our store! https://www.myminifactory.com/users/TheLazyForger
The Enlisted - Army Bundle
This set contains SIX sets from The Enlisted faction, with an overall saving of 16$!
Land Battleship - https://www.myminifactory.com/object/3d-print-228784
Battle Tanks - https://www.myminifactory.com/object/3d-print-228780
Infantry - https://www.myminifactory.com/object/3d-print-228775
Heavy Infantry and Mechs - https://www.myminifactory.com/object/3d-print-228781
Light Vehicles - https://www.myminifactory.com/object/3d-print-228779
Transports and Artillery - https://www.myminifactory.com/object/3d-print-228782
The models are optimized for 6mm but can be easily up-scaled up to 10 and 15mm scale (1:100) with excellent results.
The models are provided as .stl files and are PRE-SUPPORTED for 6mm scale. They have been extensively tested at 100% scale (6mm). A resin printer is recommended: the models shown in picture are printed at with a Anycubic Photon S. Any budget entry resin printer will be capable to achieve similar results.
All files have been revised and re-uploaded Jan 12 2023.
Looking for an opponent? Check out The Tech!
The Tech - Army Bundle
The Tech - Army Bundle
This set contains SIX sets from The Tech faction, with an overall saving of 16$!
Moreover, it contains the Full Spectrum Dominance campaign stretchgoals that are tech-related (including the Calliphon Mainframe)!
Plato Land Crawler - https://www.myminifactory.com/object/3d-print-166767
Socrates Battle Rig - https://www.myminifactory.com/object/3d-print-138213
Zeno Battle Rig - https://www.myminifactory.com/object/3d-print-166769
Thales Attack Fighter - https://www.myminifactory.com/object/3d-print-166768
Infantry and Artillery - https://www.myminifactory.com/object/3d-print-166764
Infantry Support Drones - https://www.myminifactory.com/object/3d-print-166765
Solon Battle Tank - https://www.myminifactory.com/object/3d-print-264186
Calliphon Mainframe - https://www.myminifactory.com/object/3d-print-285417
The models are optimized for 6-8mm but can be easily up-scaled up to 15mm scale (1:100) with excellent results.
The models are provided as .stl files and are PRE-SUPPORTED. They have been extensively tested at 100% scale (6mm). A resin printer is recommended: the models shown in picture are printed at with a Anycubic Photon S. Any budget entry resin printer will be capable to achieve similar results.
All files have been revised and re-uploaded Jan 12 2023.
Looking for an opponent? Check out The Enlisted!
Looking for a cool and lightweight game to play? Check out our Beta rules of Full Spectrum Dominance!
Battlefields of Tomorrow - Asian City 1
Battlefields of Tomorrow - Asian City 1
This set contains six unique buildings (with two different options with and without commercial signs) with enough variety to populate the streets of any modern asian town or any sci-fi cyberpunk environment.
The models are provided as .stl files and are PRE-SUPPORTED. They have been extensively tested at 6mm scale.
The figures are meant to be printed in 6mm, 10mm (scaling at 140-150%) and possibly in 15mm (scaling at 200-220%). Since the scale of most ranges vary, we recommend users to test with the scaling until they find their preferred scaling settings.
A resin printer is recommended: the models shown in picture are printed at 6mm scale with a Sparkmaker FHD. Any budget entry resin printer will be capable to achieve similar results.
Shanty Town 1
Battlefields of Tomorrow - Shanty Town
This set contains six unique buildings (with two different tower options), enough to fill a small town of shanty huts or to decorate the barren spaces around tall skyscrapers or buildings.
The models are provided as .stl files and are PRE-SUPPORTED. They have been extensively tested at 6mm scale.
The figures are meant to be printed in 6mm, 10mm (scaling at 140-150%) and possibly in 15mm (scaling at 200-220%). Since the scale of most ranges vary, we recommend users to test with the scaling until they find their preferred scaling settings.
A resin printer is recommended: the models shown in picture are printed at 6mm scale with a Anycubic Photon S. Any budget entry resin printer will be capable to achieve similar results.
Battlefields of Tomorrow - Asian City 2
Battlefields of Tomorrow - Asian City 2
This set contains six unique commercial buildings (including the iconic tofu shop from Initial D) with enough variety to populate the streets of any modern asian town or any sci-fi cyberpunk environment.
The models are provided as .stl files and are PRE-SUPPORTED. They have been extensively tested at 6mm scale.
The figures are meant to be printed in 6mm, 10mm (scaling at 140-150%) and possibly in 15mm (scaling at 200-220%). Since the scale of most ranges vary, we recommend users to test with the scaling until they find their preferred scaling settings.
A resin printer is recommended: the models shown in picture are printed at 6mm scale with a Sparkmaker FHD. Any budget entry resin printer will be capable to achieve similar results.
Shanty Roads
This set contains a large gas station, four wall sections, one gate, two road-side shacks and six unique objective markers for all post-apocalyptic terrains!
They integrate perfectly with the buildings of the Battlefields of Tomorrow range, in particular with the Shanty Town set (https://www.myminifactory.com/object/134864)
The models are provided as .stl files and are PRE-SUPPORTED. They have been extensively tested at 6mm scale.
Battlefields of Tomorrow - Asian City 3
Battlefields of Tomorrow - Asian City 3
This set contains eight unique residential buildings of different density with enough variety to populate the streets of any modern asian town or any sci-fi cyberpunk environment.
The models are provided as .stl files and are PRE-SUPPORTED. They have been extensively tested at 6mm scale.
The figures are meant to be printed in 6mm, 10mm (scaling at 140-150%) and possibly in 15mm (scaling at 200-220%). Since the scale of most ranges vary, we recommend users to test with the scaling until they find their preferred scaling settings.
A resin printer is recommended: the models shown in picture are printed at 6mm scale with a Sparkmaker FHD. Any budget entry resin printer will be capable to achieve similar results.
Shanty Town 2
This set contains six unique buildings to enrich your shanty town mixing with the other shanty sets:
https://www.myminifactory.com/object/134864
https://www.myminifactory.com/object/163148
The models are provided as .stl files and are PRE-SUPPORTED. They have been extensively tested at 6mm scale.
The figures are meant to be printed in 6mm, 10mm (scaling at 140-150%) and possibly in 15mm (scaling at 200-220%). Since the scale of most ranges vary, we recommend users to test with the scaling until they find their preferred scaling settings.
A resin printer is recommended: the models shown in picture are printed at 6mm scale with a Anycubic Photon S. Any budget entry resin printer will be capable to achieve similar results.
Wasteland Outposts
This set contains three unique wasteland outposts.
The models are designed to work as objective markers for Full Spectrum Dominance.
The models are provided as .stl files and are PRE-SUPPORTED. They have been extensively tested at 6mm scale. We strongly recommend to use ChiTuBox as a slicer for these files.
Full Spectrum Dominance Campaign - Extra Units
Here's the pack containing the extra units of the campaign.
If you pledged the Battlefield Tier or the Army Tier, or if you purchased one of the factions' Army Bundles before, you should be able to find the files in your bundles.
The files included are
- Tech Solon Tank
- Tech Transport or Infantry Support (use it as you need)
- Tech Casualties
- Enlisted Mortars
- Enlisted Casualties.
Bunker Entrances
This set features three variants of the massive bunker entrances, which are part of the stretchgoals of the Full Spectrum Dominance campaign.
Each large concrete construction is wide enough to fit a tank inside, and is equipped with a top slot for different kind of turrets.
The models are provided as .stl files and are PRE-SUPPORTED. They have been extensively tested at 6mm scale.
The models can be easily upscaled to 10mm (150%) and to 15mm (240%, but we recommend re-supporting).
Comms Towers
This set includes a massive comms building and two smaller comms towers.
The models are designed to work as objective markers for Full Spectrum Dominance.
The models are provided as .stl files and are PRE-SUPPORTED. They have been extensively tested at 6mm scale. We strongly recommend to use ChiTuBox as a slicer for these files.
The Tech - Solon Tanks and Light Vehicles
This set includes the Tech's Solon Tank and the transport/light vehicles. The tank features three different turret options for a variety of loadouts.
The models are provided as .stl files and are PRE-SUPPORTED. They have been extensively tested at 6mm scale. We strongly recommend to use ChiTuBox as a slicer for these files.
The models are optimized for 6mm but can be easily up-scaled up to 15mm scale (1:100) with excellent results. That is, if you have the guts to print these giants in an even more giant scale!
The models are provided as .stl files and are PRE-SUPPORTED. They have been extensively tested at 100% scale (6mm). A resin printer is recommended: the models shown in picture are printed at with a Anycubic Photon S. Any budget entry resin printer will be capable to achieve similar results.
All files have been revised and re-uploaded Jan 12 2023.
Medina sci-fi Kit
This product contains 30 unique detailing sci-fi elements for the Medina range and for any other building in a dire need of some sci-fi-zation! The buildings in the picture (in white) are NOT included, only the detailing kit is part of this product.
The pieces are provided scaled for 6mm miniatures but can be easily scaled up to 15mm without any visible loss in details.
The models are provided as .stl files and are PRE-SUPPORTED. They have been extensively tested at 6mm scale.
This tier includes everything in the campaign: - The Full Spectrum Dominance Rulebook - The full Enlisted Army Bundle - The full Tech Army Bundle - The Shanty Bundle - The Asian City Bundle - Any Milestone unlocked. ⠀ ⠀⠀
222 pioneers
USD 14.99
The Tech - Calliphon mainframe
This model represent the "Mainframe" objective marker for some of the Full Spectrum Dominance scenarios. But it's so much more than that!
This model is included in The Tech Army Bundle - with loads of other stuff more! A full playable faction for FSD!
It also includes four spider robot feeders and two spider robot cleaners ready for new and unexpected uses!
The models are provided as .stl files and are PRE-SUPPORTED. They have been extensively tested at 6mm scale. We strongly recommend to use ChiTuBox as a slicer for these files.
Scattered Crates
This set contains six unique crates that have been dropped from the sky a bit too early!
Perfect as objective markers for any small-scale game, and designed for the "Scavenging Run" scenario of Full Spectrum Dominance!
The models are provided as .stl files and are PRE-SUPPORTED. They have been extensively tested at 6mm scale.
The models can be easily upscaled to 10mm (150%) and to 15mm (240%, but we recommend re-supporting).
Full Spectrum Dominance - Rulebook
psst! Check out the currently running Full Spectrum Dominance campaign! We have miniatures and terrain, and the manual is included!
This product contains the core rulebook and accessories for Full Spectrum Dominance .
- The full PDF rulebook
- Playable cards for four factions
- Victory cards
- Quick Reference Sheet
- Bases of different sizes (better to use laser-cut ones or plastic, but it's always an option)
Check out our 3d printable models on our store! https://www.myminifactory.com/users/TheLazyForger
Wasteland Outposts
This set contains three unique wasteland outposts.
The models are designed to work as objective markers for Full Spectrum Dominance.
The models are provided as .stl files and are PRE-SUPPORTED. They have been extensively tested at 6mm scale. We strongly recommend to use ChiTuBox as a slicer for these files.
Full Spectrum Dominance Campaign - Extra Units
Here's the pack containing the extra units of the campaign.
If you pledged the Battlefield Tier or the Army Tier, or if you purchased one of the factions' Army Bundles before, you should be able to find the files in your bundles.
The files included are
- Tech Solon Tank
- Tech Transport or Infantry Support (use it as you need)
- Tech Casualties
- Enlisted Mortars
- Enlisted Casualties.
Bunker Entrances
This set features three variants of the massive bunker entrances, which are part of the stretchgoals of the Full Spectrum Dominance campaign.
Each large concrete construction is wide enough to fit a tank inside, and is equipped with a top slot for different kind of turrets.
The models are provided as .stl files and are PRE-SUPPORTED. They have been extensively tested at 6mm scale.
The models can be easily upscaled to 10mm (150%) and to 15mm (240%, but we recommend re-supporting).
Comms Towers
This set includes a massive comms building and two smaller comms towers.
The models are designed to work as objective markers for Full Spectrum Dominance.
The models are provided as .stl files and are PRE-SUPPORTED. They have been extensively tested at 6mm scale. We strongly recommend to use ChiTuBox as a slicer for these files.
The Tech - Solon Tanks and Light Vehicles
This set includes the Tech's Solon Tank and the transport/light vehicles. The tank features three different turret options for a variety of loadouts.
The models are provided as .stl files and are PRE-SUPPORTED. They have been extensively tested at 6mm scale. We strongly recommend to use ChiTuBox as a slicer for these files.
The models are optimized for 6mm but can be easily up-scaled up to 15mm scale (1:100) with excellent results. That is, if you have the guts to print these giants in an even more giant scale!
The models are provided as .stl files and are PRE-SUPPORTED. They have been extensively tested at 100% scale (6mm). A resin printer is recommended: the models shown in picture are printed at with a Anycubic Photon S. Any budget entry resin printer will be capable to achieve similar results.
All files have been revised and re-uploaded Jan 12 2023.
Medina sci-fi Kit
This product contains 30 unique detailing sci-fi elements for the Medina range and for any other building in a dire need of some sci-fi-zation! The buildings in the picture (in white) are NOT included, only the detailing kit is part of this product.
The pieces are provided scaled for 6mm miniatures but can be easily scaled up to 15mm without any visible loss in details.
The models are provided as .stl files and are PRE-SUPPORTED. They have been extensively tested at 6mm scale.
The full 40 pages Full Spectrum Dominance PDF rulebook, with cards, an introductory booklet and unique dedicated terrain for each scenario. All Milestones are included! ⠀ ⠀⠀ ⠀⠀⠀ ⠀⠀ ⠀ ⠀
Add-ons
USD 0.00
Here's a collection of sample models from our ranges, free for anyone who subscribes to our pre-launch page for Full Spectrum Dominance!
Please update your notification settings if you want to get notified when there is a new comment.