Nightmare from the Void

This troops Kit contains :
⚛ 3 bodies (6 variations when mirrored)
⚛ 5 heads (2 can be mirrored to get 7)
⚛ 3 arm variants that can go into 4 locations, allowing great customization of positions!

All parts are pre-supported!

In pictures you will find a screenshot of the settings we use to print our 3D miniatures. We test the printability of all the plans we provide, using Chitubox on an Elegoo printer. If it works for us, it should work for you

Like our models? Allow us to produce more by joining our Patreon and get 50% discount! :) check it here

The mosquito kit allows the creation of a wide variety of flying units.
With 5 different heads you will also be able to produce a multitude of different poses with a split body between the torso and the bottom to allow for tilts!

All parts are pre-supported!

In pictures you will find a screenshot of the settings we use to print our 3D miniatures. We test the printability of all the plans we provide, using Chitubox on an Elegoo printer. If it works for us, it should work for you

Like our models? Allow us to produce more by joining our Patreon and get 50% discount! :) check it here

The mindtrickster is a creature that can serve as a psychic relay to coordinate all your invasions!

In this kit there are two lower body options and all legs and body parts are freely positionable.
It's up to you to create your troops that will go perfectly with our Nightmare from the void campaign

All parts are pre-supported

In pictures you will find a screenshot of the settings we use to print our 3D miniatures.

We test the printability of all the plans we provide, using Chitubox on an Elegoo printer. If it works for us, it should work for you

Like our models? Allow us to produce more by joining our Patreon and get 50% discount! :) check it here

The silent death that strikes before we can even see it coming.
This kit contains 2 heads and the arms are positionable as you wish!

All parts are pre-supported

In pictures you will find a screenshot of the settings we use to print our 3D miniatures.

We test the printability of all the plans we provide, using Chitubox on an Elegoo printer. If it works for us, it should work for you

Like our models? Allow us to produce more by joining our Patreon and get 50% discount! :) check it here

The overlord is a massive nightmarish beast that will tear everything in its path with its sharp claws!

All parts are pre-supported

In pictures you will find a screenshot of the settings we use to print our 3D miniatures.

We test the printability of all the plans we provide, using Chitubox on an Elegoo printer. If it works for us, it should work for you

Like our models? Allow us to produce more by joining our Patreon and get 50% discount! :) check it here

A huge beast is released. We calibrated it to match 14cm in height. Reinforce your invasion troops with this unique character

This model is part of our Nightmare from the Void project that you can find in a single bundle HERE on Myminifactory :)

All parts are pre-supported

In pictures you will find a screenshot of the settings we use to print our 3D miniatures.

We test the printability of all the plans we provide, using Chitubox on an Elegoo printer. If it works for us, it should work for you

Like our models? Allow us to produce more by joining our Patreon and get 50% discount! :) check it here

Very unstable, boaters are explosive little wonders!

This bloaters kit contains :

⚛ 3 bodies ⚛ 6 legs

The legs are numbered in pairs, from 1 to 3, from front to back but you position them freely.

This model is part of our Nightmare from the Void project that you can find in a single bundle HERE on Myminifactory :)

All parts are pre-supported

In pictures you will find a screenshot of the settings we use to print our 3D miniatures.

We test the printability of all the plans we provide, using Chitubox on an Elegoo printer. If it works for us, it should work for you

Like our models? Allow us to produce more by joining our Patreon and get 50% discount! :) check it here

These ravenous Larvae have 3 poses which make 6 variations when mirrored. They can be used as stand alone units or to decorate your base, your dioramas or to give your characters some bite! 
They can also be enlarged to be used as monsters like sand worms...

This model is part of our Nightmare from the Void project that you can find in a single bundle HERE on Myminifactory :)

All parts are pre-supported

In pictures you will find a screenshot of the settings we use to print our 3D miniatures.

We test the printability of all the plans we provide, using Chitubox on an Elegoo printer. If it works for us, it should work for you

Like our models? Allow us to produce more by joining our Patreon and get 50% discount! :) This model was a November's Patreon realease, check it here

This Keepers kit contains :

❇3 heads ❇2 bodies ❇3 legs ❇3 pairs of small arms
❇3 pairs of big arms

The Keepers come from a long evolution having selected the most efficient genomes of their species.
Sent to the front line, they can constitute the first level of forces occupying a battlefield.

This model is part of our Nightmare from the Void project that you can find in a single bundle HERE on Myminifactory :)

All parts are pre-supported

In pictures you will find a screenshot of the settings we use to print our 3D miniatures.

We test the printability of all the plans we provide, using Chitubox on an Elegoo printer. If it works for us, it should work for you

Like our models? Allow us to produce more by joining our Patreon and get 50% discount! :) This model was a November's Patreon realease, check it here

Few have been able to see it and come out alive to witness the overwhelming power of the Overmind.
Reinforce your invasion troops with this unique character

This model is part of our Nightmare from the Void project that you can find in a single bundle HERE on Myminifactory :)

All parts are pre-supported

In pictures you will find a screenshot of the settings we use to print our 3D miniatures.

We test the printability of all the plans we provide, using Chitubox on an Elegoo printer. If it works for us, it should work for you

Like our models? Allow us to produce more by joining our Patreon and get 50% discount! :) check it here

This Wraiths kit contains :

❇ 3 Heads ❇ 3 Bodies❇ 3 pairs of big arms ❇ 2 pairs of mid arms ❇ 2 pairs of low arms

Wraiths are powerful, swift, and stealthy. They will reap all forms of life in their path. A real asset to bring to any invading army!

This model is part of our Nightmare from the Void project that you can find in a single bundle HERE on Myminifactory :)

All parts are pre-supported

In pictures you will find a screenshot of the settings we use to print our 3D miniatures.

We test the printability of all the plans we provide, using Chitubox on an Elegoo printer. If it works for us, it should work for you

Like our models? Allow us to produce more by joining our Patreon and get 50% discount! :) check it here

A huge beast is released. We calibrated it to match 14cm in height. Reinforce your invasion troops with this unique character

This model is part of our Nightmare from the Void project that you can find in a single bundle HERE on Myminifactory :)

All parts are pre-supported

In pictures you will find a screenshot of the settings we use to print our 3D miniatures.

We test the printability of all the plans we provide, using Chitubox on an Elegoo printer. If it works for us, it should work for you

Like our models? Allow us to produce more by joining our Patreon and get 50% discount! :) check it here

Very unstable, boaters are explosive little wonders!

This bloaters kit contains :

⚛ 3 bodies ⚛ 6 legs

The legs are numbered in pairs, from 1 to 3, from front to back but you position them freely.

This model is part of our Nightmare from the Void project that you can find in a single bundle HERE on Myminifactory :)

All parts are pre-supported

In pictures you will find a screenshot of the settings we use to print our 3D miniatures.

We test the printability of all the plans we provide, using Chitubox on an Elegoo printer. If it works for us, it should work for you

Like our models? Allow us to produce more by joining our Patreon and get 50% discount! :) check it here

The silent death that strikes before we can even see it coming.
This kit contains 2 heads and the arms are positionable as you wish!

All parts are pre-supported

In pictures you will find a screenshot of the settings we use to print our 3D miniatures.

We test the printability of all the plans we provide, using Chitubox on an Elegoo printer. If it works for us, it should work for you

Like our models? Allow us to produce more by joining our Patreon and get 50% discount! :) check it here

This Keepers kit contains :

❇3 heads ❇2 bodies ❇3 legs ❇3 pairs of small arms
❇3 pairs of big arms

The Keepers come from a long evolution having selected the most efficient genomes of their species.
Sent to the front line, they can constitute the first level of forces occupying a battlefield.

This model is part of our Nightmare from the Void project that you can find in a single bundle HERE on Myminifactory :)

All parts are pre-supported

In pictures you will find a screenshot of the settings we use to print our 3D miniatures.

We test the printability of all the plans we provide, using Chitubox on an Elegoo printer. If it works for us, it should work for you

Like our models? Allow us to produce more by joining our Patreon and get 50% discount! :) This model was a November's Patreon realease, check it here

These ravenous Larvae have 3 poses which make 6 variations when mirrored. They can be used as stand alone units or to decorate your base, your dioramas or to give your characters some bite! 
They can also be enlarged to be used as monsters like sand worms...

This model is part of our Nightmare from the Void project that you can find in a single bundle HERE on Myminifactory :)

All parts are pre-supported

In pictures you will find a screenshot of the settings we use to print our 3D miniatures.

We test the printability of all the plans we provide, using Chitubox on an Elegoo printer. If it works for us, it should work for you

Like our models? Allow us to produce more by joining our Patreon and get 50% discount! :) This model was a November's Patreon realease, check it here

The mindtrickster is a creature that can serve as a psychic relay to coordinate all your invasions!

In this kit there are two lower body options and all legs and body parts are freely positionable.
It's up to you to create your troops that will go perfectly with our Nightmare from the void campaign

All parts are pre-supported

In pictures you will find a screenshot of the settings we use to print our 3D miniatures.

We test the printability of all the plans we provide, using Chitubox on an Elegoo printer. If it works for us, it should work for you

Like our models? Allow us to produce more by joining our Patreon and get 50% discount! :) check it here

The mosquito kit allows the creation of a wide variety of flying units.
With 5 different heads you will also be able to produce a multitude of different poses with a split body between the torso and the bottom to allow for tilts!

All parts are pre-supported!

In pictures you will find a screenshot of the settings we use to print our 3D miniatures. We test the printability of all the plans we provide, using Chitubox on an Elegoo printer. If it works for us, it should work for you

Like our models? Allow us to produce more by joining our Patreon and get 50% discount! :) check it here

The overlord is a massive nightmarish beast that will tear everything in its path with its sharp claws!

All parts are pre-supported

In pictures you will find a screenshot of the settings we use to print our 3D miniatures.

We test the printability of all the plans we provide, using Chitubox on an Elegoo printer. If it works for us, it should work for you

Like our models? Allow us to produce more by joining our Patreon and get 50% discount! :) check it here

Few have been able to see it and come out alive to witness the overwhelming power of the Overmind.
Reinforce your invasion troops with this unique character

This model is part of our Nightmare from the Void project that you can find in a single bundle HERE on Myminifactory :)

All parts are pre-supported

In pictures you will find a screenshot of the settings we use to print our 3D miniatures.

We test the printability of all the plans we provide, using Chitubox on an Elegoo printer. If it works for us, it should work for you

Like our models? Allow us to produce more by joining our Patreon and get 50% discount! :) check it here

This troops Kit contains :
⚛ 3 bodies (6 variations when mirrored)
⚛ 5 heads (2 can be mirrored to get 7)
⚛ 3 arm variants that can go into 4 locations, allowing great customization of positions!

All parts are pre-supported!

In pictures you will find a screenshot of the settings we use to print our 3D miniatures. We test the printability of all the plans we provide, using Chitubox on an Elegoo printer. If it works for us, it should work for you

Like our models? Allow us to produce more by joining our Patreon and get 50% discount! :) check it here

This Wraiths kit contains :

❇ 3 Heads ❇ 3 Bodies❇ 3 pairs of big arms ❇ 2 pairs of mid arms ❇ 2 pairs of low arms

Wraiths are powerful, swift, and stealthy. They will reap all forms of life in their path. A real asset to bring to any invading army!

This model is part of our Nightmare from the Void project that you can find in a single bundle HERE on Myminifactory :)

All parts are pre-supported

In pictures you will find a screenshot of the settings we use to print our 3D miniatures.

We test the printability of all the plans we provide, using Chitubox on an Elegoo printer. If it works for us, it should work for you

Like our models? Allow us to produce more by joining our Patreon and get 50% discount! :) check it here