Starship IV Chimera

Current Version: 1.1.1

Expand your Transport Delta deck plans with these lengthening tiles, suitable for use with 28-32mm miniatures. Compatible with 2nd Dynasty's Starship Transport Delta tiles.

Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available free from Printable Scenery.

Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.

Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.

CURRENT VERSION: 1.0.8

Get the Starship Chimera STL files and all campaign stretch goals.

Includes:

Starship Chimera STL Files
Starship Chimera Stretch Goal STL Files
Non-Commercial Printing License

Current version: 1.1 - 17/09/2020

This pack contains five sitting crewmembers, including a female captain, male pilot with and without helmet, and a male tech with and without helmet.

Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. 

Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.

Current version: 1.4 - Compatible with Operation Maelstrom

Make your own customisable starfighters, combining engines, wings, weapons systems and more, suitable for use with 28-32mm miniatures. With almost 50 components, you can make a wide variety of combinations, and mix and match them with some of your favourite turret weapons from Turrets Pack I, or attach these weapon points on your existing hardpoints from Starship III!

Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available free from Printable Scenery.

Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas.

Parts are designed in 28-30mm scale, but can be rescaled easily in your 3D printing software package

Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available free from Printable Scenery.

Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas.

Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package

CURRENT VERSION: 1.0.9

Get the Starship Chimera Pathfinder, a smaller, distinct deep space exploration ship. Fully detailed interior and compatibility with other Chimera parts, but with one important caveat:

NO STRETCH GOALS INCLUDED

This is Starship Chimera Pathfinder only!

INCLUDES:

• Starship Chimera Pathfinder STL Files
• Non-Commercial Printing License

Paint and customisation by Brian Jenkins

CURRENT VERSION: 1.3.2

28 Stretch Goals unlocked during Starshp IV.

Starship IV - Common Stretch Goals - Change Log
===============================================

14/10/2020
Version 1.1

- Added bonus parts to Chimera Plus and added shared parts with the Skinny so that everything is in one folder system.

18/08/2020
Version 1.0.9

- Closets and cabinet fixed in the state room - Closets - Standalone 1.2.stl and Cabinet - Standalone 1.1.stl.
- Added unbased servers - 1x1 - I - Server - Type II - Closed - Unbased.stl and 1x1 - I - Server - Type II - Open - Unbased.stl.

11/05/2020

Version 1.0.8

- Added Outer Hull - Chimera Plus - Forward Cargo Bay Hinge - 3 Inch 1.1.stl and Wide Nose Joint.stl to the Chimera Plus to fix an issue with the cargo bay hinge and add something to cover the gap with the wider doors.

24/04/2020
Version 1.0.7

- Added 3/4 modular bulkheads to Plus and Skinny for above the engines

22/04/2020
Version 1.0.6

- Added fix for triple bunks in the crew quarters

21/04/2020
Version 1.0.5

- Added new parts to accomodate the wider Chimera Plus, and middle deck bulkhead edges. Also, 3 inch wide ramp.

13/04/2020
Version 1.0.4

- Fixed separated monitors from Raised Bridge - Upper Bridge Nose.stl in the Raised Bridge stretch
- Added missing bulkhead for engine mounts for the Chimera Plus

09/04/2020
Version 1.0.3

- Put out a fix on the middle cargo bay parts for the Chimera Plus variant that had openlock ports placed incorrectly.

25/03/2020
Version 1.0.2

- Added parts to the Chimera Plus to allow for wider hangar bay bulkheads

12/03/2020
Version 1.0.1

- Added missing cargo ramp to Plus and Skinny variants

11/03/2020
Version 1.0

- Added the ghost ship files
- Production version

20/02/2020
Version 0.9.2

- Added missing angled to flat conversion piece to the Flat Top stretch goal

17/02/2020
Version 0.9.1

- Replaced the old large turret parts with the 1.1 versions; an older version was accidentally included. The newer one has thicker mountings and the clip ports align correctly.

14/02/2020
Version 0.9

- Added the rest of Third Class

07/02/2020
Version 0.8

- Added Third Class (window only)
- Added Hull Extenders
- Added Sandcrawler
- Added State Room

31/01/2020
Version 0.7

- Added Side Engines
- Added Crew Quarters
- Added Broadside Weapons
- Updated Landing Gear to include retracted models
- Updated VTOL Engines to include round engines

27/01/2020
Version 0.6.1

- Updated Manoeuvrability Pack variants to include separate RCS thruster versions and Pathfinder compatibility
- Updated Chimera Plus to include turret port compatibility

24/01/2020
Version 0.6

- Added Chimera Plus
- Added Cargo stretch
- Added Manoeuvrability Pack
- Updated Escape Pod for more compatability
- Updated Flat Top for Skinny compatability

20/01/2020
Version 0.5.1

- Added missing Forward airlock - airlock.stl

17/01/2020
Version 0.5

- Added Chimera Skinny
- Added Escape Pods
- Added Raised Bridge

Version 0.4

- Fixed airlock door to not jam
- Added

10/01/2020
Version 0.3

- Added Airlocks
- Added Computers
- Added Angled Underside
- Added this change log

Version: 2.0 - implemented the new high fidelity exterior and interior, including 3mf print beds that you can import for easy printing. Instructions coming soon.

Modify your Scout Ship Beta or Beta Centauri to add a huge new hammerhead nose to the Beta series. This provides a huge space for a fleet command bridge or to plenty of space to further expand your starship, essentially doubling the interior volume, including the split level. Includes four additional standard turret ports (port, starboard, ventral and dorsal). Comes with an expanded bridge layout as default.

Please note that you will need the base ship to be able to build this variant.

Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available free from Printable Scenery.

These tiles are commercially available versions of 2nd Dynasty's 2019 Starship IV Kickstarter.

Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.

Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.

Current Version: 1.1 - 16/09/2020

Expand your Starship deck plans with these gantry pack tiles, suitable for use with 28-32mm miniatures. Compatible with other 2nd Dynasty tiles or any other OpenLOCK-compatible tiles.

Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available free from Printable Scenery.

Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas.

Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.

Expand your Starship deck plans with these turrets pack IV tiles, suitable for use with 28-32mm miniatures. Compatible with other 2nd Dynasty tiles or any other OpenLOCK-compatible tiles.

Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available free from Printable Scenery.

Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports.

Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.

Current Version: 1.1.1

Expand your Transport Delta deck plans with these lengthening tiles, suitable for use with 28-32mm miniatures. Compatible with 2nd Dynasty's Starship Transport Delta tiles.

Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available free from Printable Scenery.

Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.

Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.

CURRENT VERSION: 1.0.8

Get the Starship Chimera STL files and all campaign stretch goals.

Includes:

Starship Chimera STL Files
Starship Chimera Stretch Goal STL Files
Non-Commercial Printing License

Current version: 1.1 - 17/09/2020

This pack contains five sitting crewmembers, including a female captain, male pilot with and without helmet, and a male tech with and without helmet.

Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. 

Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.

Current version: 1.4 - Compatible with Operation Maelstrom

Make your own customisable starfighters, combining engines, wings, weapons systems and more, suitable for use with 28-32mm miniatures. With almost 50 components, you can make a wide variety of combinations, and mix and match them with some of your favourite turret weapons from Turrets Pack I, or attach these weapon points on your existing hardpoints from Starship III!

Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available free from Printable Scenery.

Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas.

Parts are designed in 28-30mm scale, but can be rescaled easily in your 3D printing software package

Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available free from Printable Scenery.

Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas.

Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package

CURRENT VERSION: 1.0.9

Get the Starship Chimera Pathfinder, a smaller, distinct deep space exploration ship. Fully detailed interior and compatibility with other Chimera parts, but with one important caveat:

NO STRETCH GOALS INCLUDED

This is Starship Chimera Pathfinder only!

INCLUDES:

• Starship Chimera Pathfinder STL Files
• Non-Commercial Printing License

Paint and customisation by Brian Jenkins

Expand your Starship deck plans with these turrets pack II tiles, suitable for use with 28-32mm miniatures. Compatible with other 2nd Dynasty tiles or any other OpenLOCK-compatible tiles.

Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available free from Printable Scenery.

Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports.

Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.

This package includes:

• Double Laser Lens Turret (Larger).stl
  Double Laser Lens Turret.stl
  Gun Turret Type 1.stl
  Gun Turret Type 2.stl
  Missile Turret Base.stl
  Missile Turret Rack.stl
  Scout Ship Turret Barrel.stl
  Single Laser Lens Turret (Larger).stl
  Single Laser Lens Turret.stl
  Single Laser Lens Type 2 Turret.stl
  Single Laser Lens Type 3.stl
  Triple Laser Lens Turret (Larger).stl
  Triple Laser Lens Turret.stl

Expand your Starship deck plans with these Turrets pack III tiles, suitable for use with 28-32mm miniatures. Compatible with other 2nd Dynasty tiles or any other OpenLOCK-compatible tiles.

Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available free from Printable Scenery.

Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports.

Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.

This package includes:

• Airlock Turret.stl
  Drone Chicken Legs.stl
  Drone Head.stl
  Drone Quad Legs.stl
  I Internal Drone Tube.stl
  Radar Array Turret.stl
  Radar Dish Turret.stl
  Spotlight Turret.stl

Expand your Starship deck plans with these habitation tiles, suitable for use with 28-32mm miniatures. Compatible with other 2nd Dynasty tiles or any other OpenLOCK-compatible tiles.

Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available free from Printable Scenery.

Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.

Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.

This package includes:

• Double Counter Combo (unbased).stl
  Double Counter Storage (unbased).stl
  Double Counter Washers (unbased).stl
  I Single Counter Storage.stl
  I Single Counter Washer.stl
  S Double Counter Combo.stl
  S Double Counter Storage.stl
  S Double Counter Washers.stl
  Single Counter Storage (unbased).stl
  Single Counter Washer (unbased).stl
  A Kitchen Counter.stl
  A Kitchenette.stl
  kitchenwall_01.stl
  kitchenwall_02.stl
  Baseless Food Dispencer.stl
  Baseless Trash Disposal.stl
  I Food Dispencer.stl
  I Trash Disposal.stl
  Special Bunk Free Standing.stl
  Special Double Bed Variant 1.stl
  Special Double Bed Variant 2.stl
  Special Single Bed Free Standing.stl
  DoorTypeC.stl
  Habitation Room Variant 1.stl
  Habitation Room Variant 2.stl
  II Corner Shower-WC combo.stl
  Single Chair.stl
  Sofa.stl
  Table.stl

CURRENT VERSION: 1.3.2

28 Stretch Goals unlocked during Starshp IV.

Starship IV - Common Stretch Goals - Change Log
===============================================

14/10/2020
Version 1.1

- Added bonus parts to Chimera Plus and added shared parts with the Skinny so that everything is in one folder system.

18/08/2020
Version 1.0.9

- Closets and cabinet fixed in the state room - Closets - Standalone 1.2.stl and Cabinet - Standalone 1.1.stl.
- Added unbased servers - 1x1 - I - Server - Type II - Closed - Unbased.stl and 1x1 - I - Server - Type II - Open - Unbased.stl.

11/05/2020

Version 1.0.8

- Added Outer Hull - Chimera Plus - Forward Cargo Bay Hinge - 3 Inch 1.1.stl and Wide Nose Joint.stl to the Chimera Plus to fix an issue with the cargo bay hinge and add something to cover the gap with the wider doors.

24/04/2020
Version 1.0.7

- Added 3/4 modular bulkheads to Plus and Skinny for above the engines

22/04/2020
Version 1.0.6

- Added fix for triple bunks in the crew quarters

21/04/2020
Version 1.0.5

- Added new parts to accomodate the wider Chimera Plus, and middle deck bulkhead edges. Also, 3 inch wide ramp.

13/04/2020
Version 1.0.4

- Fixed separated monitors from Raised Bridge - Upper Bridge Nose.stl in the Raised Bridge stretch
- Added missing bulkhead for engine mounts for the Chimera Plus

09/04/2020
Version 1.0.3

- Put out a fix on the middle cargo bay parts for the Chimera Plus variant that had openlock ports placed incorrectly.

25/03/2020
Version 1.0.2

- Added parts to the Chimera Plus to allow for wider hangar bay bulkheads

12/03/2020
Version 1.0.1

- Added missing cargo ramp to Plus and Skinny variants

11/03/2020
Version 1.0

- Added the ghost ship files
- Production version

20/02/2020
Version 0.9.2

- Added missing angled to flat conversion piece to the Flat Top stretch goal

17/02/2020
Version 0.9.1

- Replaced the old large turret parts with the 1.1 versions; an older version was accidentally included. The newer one has thicker mountings and the clip ports align correctly.

14/02/2020
Version 0.9

- Added the rest of Third Class

07/02/2020
Version 0.8

- Added Third Class (window only)
- Added Hull Extenders
- Added Sandcrawler
- Added State Room

31/01/2020
Version 0.7

- Added Side Engines
- Added Crew Quarters
- Added Broadside Weapons
- Updated Landing Gear to include retracted models
- Updated VTOL Engines to include round engines

27/01/2020
Version 0.6.1

- Updated Manoeuvrability Pack variants to include separate RCS thruster versions and Pathfinder compatibility
- Updated Chimera Plus to include turret port compatibility

24/01/2020
Version 0.6

- Added Chimera Plus
- Added Cargo stretch
- Added Manoeuvrability Pack
- Updated Escape Pod for more compatability
- Updated Flat Top for Skinny compatability

20/01/2020
Version 0.5.1

- Added missing Forward airlock - airlock.stl

17/01/2020
Version 0.5

- Added Chimera Skinny
- Added Escape Pods
- Added Raised Bridge

Version 0.4

- Fixed airlock door to not jam
- Added

10/01/2020
Version 0.3

- Added Airlocks
- Added Computers
- Added Angled Underside
- Added this change log

This best of pack includes a variety of our most popular items from Starship I and Starship II.

Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 50-100 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. For optimal printing, you will need to add supports, particularly for overhanging areas, such as the top of door frames.

Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.

This package includes:

• Spacesuit Locker
  Power Loader
  Lockers (based and unbased)
  Hangar Taxi
  Missiles (three variants and two missile trolleys)
  Cryo Chambers (based and unbased, standing and horizontal variants)
  Machinery (4 variants, based and unbased, including water pumps, generators and servers)

CURRENT VERSION: 1.4.6

Additional Starship III Common Stretch Goals:

• Boarding Tube
• Bonus Items
• Hard Points
• Medbay
• Revised Tactical Miniatures
• Tactical Miniatures (in 1:270 scale and 1 inch hex scale)
• Variant Miniatures I (in same scales as above)
• Workshop

Current Version: 2.0 (Delta 1700-Series) (22/12/2023)

Cruise the hyperspace lanes in this high-speed transport. Haul cargo - legal or illicit - with two massive engines to get you from point A to point B. Manoeuvre with the fluidity of repulsor technology and defend yourself with manned or unmanned turrets and a powerful shield generator.

Create your own full scale printable 3D transport craft, with modular interior and cutaway structure!

• The ship is detailed inside and out and a variety of configurations can be used to customise the deck plans
  Modular interior – customise the layout however you like using other Starship or compatible tiles
  The transport has larger parts, and requires a medium sized print bed that can fit 215mm/8.5 inches
  Contains over 80 parts
  Largest part is 176×62×140mm (7×2.5×5.5")Can be rotated to fit 156×140×140mm (6.1×5.5×5.5")
  Longest part is 215×155×35mm (6×8.5×1.4”)
  There are some additional margins if parts are rotated, etc.

Also includes all Transport Delta-related stretch goals from Starship III Kickstarter.

Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available from Printable Scenery. 

Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns and should be fully printable using PLA, ABS, PETG or PEI plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.

Parts are designed in 28mm scale (1" squares), but can be rescaled easily in your 3D printing software package.

Version: 2.6.5 - 28/10/2021

Need a way to get your units from the ground to orbit? This shuttle is fully modular and can be configured as a dropship, cargo shuttle, or even a small star ship. More than a mere deck plan, this product includes a full scale (sized to 28mm miniatures) fuselage complete with manoeuvring thrusters, sensors, landing gear and articulated main thrusters for VTOL operations.

Modular interior – customise the layout however you like using other Starship or compatible tiles
Alternate parts for large and small print beds 
High and low detail versions
Contains over 50 pieces
Low support requirements
Create your own full scale printable 3D shuttle craft, with modular interior and cutaway structure!

Also includes all Space Shuttle Alpha-related stretch goals from Starship III Kickstarter.

Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available from Printable Scenery. 

Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.

Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.

Version: 2.0 - implemented the new high fidelity exterior and interior, including 3mf print beds that you can import for easy printing. Instructions coming soon.

Modify your Scout Ship Beta or Beta Centauri to add a huge new hammerhead nose to the Beta series. This provides a huge space for a fleet command bridge or to plenty of space to further expand your starship, essentially doubling the interior volume, including the split level. Includes four additional standard turret ports (port, starboard, ventral and dorsal). Comes with an expanded bridge layout as default.

Please note that you will need the base ship to be able to build this variant.

Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available free from Printable Scenery.

These tiles are commercially available versions of 2nd Dynasty's 2019 Starship IV Kickstarter.

Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.

Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.

CURRENT VERSION: 1.1

Expand your Starship deck plans with these turret tiles, suitable for use with 28-32mm miniatures. Compatible with other 2nd Dynasty tiles or any other OpenLOCK-compatible tiles.

Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available free from Printable Scenery.

Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.

Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.

This package includes:

• cannon_launcher_turret_base.stl
  cannon_launcher_turret_bottom.stl
  cannon_launcher_turret_top.stl
  Rotary Laser Lens Turret 1.1.stl
  Rotary Laser Lens Turret.stl
  Single Auto Turret.stl
  Twin Auto Turret 1.1.stl
  Twin Auto Turret.stl
  Twin Manned Turret 1.1.stl
  Twin Manned Turret.stl
  Single Beam Cannon.stl
  Single Cannon.stl
  Single Laser.stl
  Triple Laser.stl
  Double Beam Cannon Left.stl
  Double Beam Cannon Right.stl
  Quad Cannon.stl
  Single Cannon.stl
  Single Laser.stl
  Triple Cannon Left.stl
  Triple Cannon Right.stl
  Double Beam Cannon Clip Opposite.stl
  Double Beam Cannon Clip.stl
  Laser Cannon Clip.stl
  Quad Cannon Clip.stl
  Single Cannon Clip.stl
  Single Cannon Variant Clip.stl
  Single Laser Clip.stl
  Triple Cannon Clip.stl
  Triple Cannon Large Clip.stl

This pack contains five sitting crewmembers, including a captain, pilot with and without helmet, and tech with and without helmet. Bridge furniture is also included.

Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 50-100 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. For optimal printing, you will need to add supports, and printing on a 45 degree angle will produce a smoother print.

Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.

This package includes:

• Captain Seated
• Tech Seated
• Tech Seated with helmet
• Pilot Seated
• Pilot Seated with helmet
• Pilot Seated
• Pilot Control Panel
• Tech Control Panel
• Crew Seat
• Captain's Chair

CURRENT VERSION: 1.3.4

Explore deep space and final frontiers with this full 28mm scale scout ship, designed stock-standard for long haul endurance scout missions. Includes two manned turrets for defending in rough territory, a full sensor suite package for scanning new systems, a well equipped engineering section, cargo hold, living quarters and a 5-station forward bridge.

Modular interior – customise the layout however you like using other Starship or compatible tiles
Contains over 50 pieces
Minimal support requirements
Create your own full scale printable 3D scout ship, with modular interior and cutaway structure!

Also includes all Scout Ship Beta-related stretch goals from Starship III on Kickstarter.

Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available from Printable Scenery.

Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.

Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.

Current Version: 1.1 - 16/09/2020

Expand your Starship deck plans with these gantry pack tiles, suitable for use with 28-32mm miniatures. Compatible with other 2nd Dynasty tiles or any other OpenLOCK-compatible tiles.

Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available free from Printable Scenery.

Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas.

Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.

Expand your Starship deck plans with these turrets pack IV tiles, suitable for use with 28-32mm miniatures. Compatible with other 2nd Dynasty tiles or any other OpenLOCK-compatible tiles.

Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available free from Printable Scenery.

Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports.

Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.

Create your own starship deckplans with these tiles from Starship II Kickstarter! Allows the construction of generic starship corridors, rooms or other sci-fi themed constructions. Suitable for use with 28-32mm miniatures.

Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available from Printable Scenery.

Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.

Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.

Starship II Core Pledge corresponds the Lieutenant Pledge in the Starship II Kickstarter. For more details, follow this link:

https://www.kickstarter.com/projects/2nddynasty/starship-ii-3d-printable-openlock-compatible-deck?ref=nav_search&result=project&term=2nd%20dynasty

Current Version: 1.1.1

Expand your Transport Delta deck plans with these lengthening tiles, suitable for use with 28-32mm miniatures. Compatible with 2nd Dynasty's Starship Transport Delta tiles.

Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available free from Printable Scenery.

Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.

Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.

Current Version: 1.1 (13/07/2020) Gunship - Turret 1.1.stl update

Create your own starship deckplans with these tiles from Starship I Kickstarter! Allows the construction of generic starship corridors, rooms or other sci-fi themed constructions. Suitable for use with 28-32mm miniatures.

Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available from Printable Scenery.

Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.

Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.

Starship I Core Pledge corresponds the Commander Pledge in the Starship I Kickstarter. For more details, follow this link:

https://www.kickstarter.com/projects/2nddynasty/starship-3d-printable-openlock-compatible-deck-pla?ref=nav_search&result=project&term=2nd%20dynasty

CURRENT VERSION: 1.0.8

Get the Starship Chimera STL files and all campaign stretch goals.

Includes:

Starship Chimera STL Files
Starship Chimera Stretch Goal STL Files
Non-Commercial Printing License

Current version: 1.1 - 17/09/2020

This pack contains five sitting crewmembers, including a female captain, male pilot with and without helmet, and a male tech with and without helmet.

Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. 

Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.

Current version: 1.4 - Compatible with Operation Maelstrom

Make your own customisable starfighters, combining engines, wings, weapons systems and more, suitable for use with 28-32mm miniatures. With almost 50 components, you can make a wide variety of combinations, and mix and match them with some of your favourite turret weapons from Turrets Pack I, or attach these weapon points on your existing hardpoints from Starship III!

Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available free from Printable Scenery.

Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas.

Parts are designed in 28-30mm scale, but can be rescaled easily in your 3D printing software package

Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available free from Printable Scenery.

Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas.

Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package

Seek adventure amongst the stars! Explore strange new worlds, smuggle illicit cargos across the hyperspace lanes or launch a space to ground assault, in your Scout Ship, Transport, or Space Shuttle!

Starship III Core Pledge includes three original, fully 3D-printable spaceships scaled for 28mm play in your favourite Tabletop RPGs or Wargames. The ships are detailed inside and out and a variety of configurations can be used to customise the deck plans.

Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available from Printable Scenery.

Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.

Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.

Starship III Core Pledge corresponds the All-In Pledge in the Starship III Kickstarter. For more details, follow this link:

https://www.kickstarter.com/projects/2nddynasty/starship-iii-fully-3d-printable-28mm-spaceships?ref=nav_search&result=project&term=2nd%20dynasty

CURRENT VERSION: 1.0.9

Get the Starship Chimera Pathfinder, a smaller, distinct deep space exploration ship. Fully detailed interior and compatibility with other Chimera parts, but with one important caveat:

NO STRETCH GOALS INCLUDED

This is Starship Chimera Pathfinder only!

INCLUDES:

• Starship Chimera Pathfinder STL Files
• Non-Commercial Printing License

Paint and customisation by Brian Jenkins

Expand your Starship deck plans with these turrets pack II tiles, suitable for use with 28-32mm miniatures. Compatible with other 2nd Dynasty tiles or any other OpenLOCK-compatible tiles.

Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available free from Printable Scenery.

Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports.

Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.

This package includes:

• Double Laser Lens Turret (Larger).stl
  Double Laser Lens Turret.stl
  Gun Turret Type 1.stl
  Gun Turret Type 2.stl
  Missile Turret Base.stl
  Missile Turret Rack.stl
  Scout Ship Turret Barrel.stl
  Single Laser Lens Turret (Larger).stl
  Single Laser Lens Turret.stl
  Single Laser Lens Type 2 Turret.stl
  Single Laser Lens Type 3.stl
  Triple Laser Lens Turret (Larger).stl
  Triple Laser Lens Turret.stl

Expand your Starship deck plans with these Turrets pack III tiles, suitable for use with 28-32mm miniatures. Compatible with other 2nd Dynasty tiles or any other OpenLOCK-compatible tiles.

Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available free from Printable Scenery.

Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports.

Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.

This package includes:

• Airlock Turret.stl
  Drone Chicken Legs.stl
  Drone Head.stl
  Drone Quad Legs.stl
  I Internal Drone Tube.stl
  Radar Array Turret.stl
  Radar Dish Turret.stl
  Spotlight Turret.stl

Expand your Starship deck plans with these habitation tiles, suitable for use with 28-32mm miniatures. Compatible with other 2nd Dynasty tiles or any other OpenLOCK-compatible tiles.

Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available free from Printable Scenery.

Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.

Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.

This package includes:

• Double Counter Combo (unbased).stl
  Double Counter Storage (unbased).stl
  Double Counter Washers (unbased).stl
  I Single Counter Storage.stl
  I Single Counter Washer.stl
  S Double Counter Combo.stl
  S Double Counter Storage.stl
  S Double Counter Washers.stl
  Single Counter Storage (unbased).stl
  Single Counter Washer (unbased).stl
  A Kitchen Counter.stl
  A Kitchenette.stl
  kitchenwall_01.stl
  kitchenwall_02.stl
  Baseless Food Dispencer.stl
  Baseless Trash Disposal.stl
  I Food Dispencer.stl
  I Trash Disposal.stl
  Special Bunk Free Standing.stl
  Special Double Bed Variant 1.stl
  Special Double Bed Variant 2.stl
  Special Single Bed Free Standing.stl
  DoorTypeC.stl
  Habitation Room Variant 1.stl
  Habitation Room Variant 2.stl
  II Corner Shower-WC combo.stl
  Single Chair.stl
  Sofa.stl
  Table.stl

CURRENT VERSION: 1.3.2

28 Stretch Goals unlocked during Starshp IV.

Starship IV - Common Stretch Goals - Change Log
===============================================

14/10/2020
Version 1.1

- Added bonus parts to Chimera Plus and added shared parts with the Skinny so that everything is in one folder system.

18/08/2020
Version 1.0.9

- Closets and cabinet fixed in the state room - Closets - Standalone 1.2.stl and Cabinet - Standalone 1.1.stl.
- Added unbased servers - 1x1 - I - Server - Type II - Closed - Unbased.stl and 1x1 - I - Server - Type II - Open - Unbased.stl.

11/05/2020

Version 1.0.8

- Added Outer Hull - Chimera Plus - Forward Cargo Bay Hinge - 3 Inch 1.1.stl and Wide Nose Joint.stl to the Chimera Plus to fix an issue with the cargo bay hinge and add something to cover the gap with the wider doors.

24/04/2020
Version 1.0.7

- Added 3/4 modular bulkheads to Plus and Skinny for above the engines

22/04/2020
Version 1.0.6

- Added fix for triple bunks in the crew quarters

21/04/2020
Version 1.0.5

- Added new parts to accomodate the wider Chimera Plus, and middle deck bulkhead edges. Also, 3 inch wide ramp.

13/04/2020
Version 1.0.4

- Fixed separated monitors from Raised Bridge - Upper Bridge Nose.stl in the Raised Bridge stretch
- Added missing bulkhead for engine mounts for the Chimera Plus

09/04/2020
Version 1.0.3

- Put out a fix on the middle cargo bay parts for the Chimera Plus variant that had openlock ports placed incorrectly.

25/03/2020
Version 1.0.2

- Added parts to the Chimera Plus to allow for wider hangar bay bulkheads

12/03/2020
Version 1.0.1

- Added missing cargo ramp to Plus and Skinny variants

11/03/2020
Version 1.0

- Added the ghost ship files
- Production version

20/02/2020
Version 0.9.2

- Added missing angled to flat conversion piece to the Flat Top stretch goal

17/02/2020
Version 0.9.1

- Replaced the old large turret parts with the 1.1 versions; an older version was accidentally included. The newer one has thicker mountings and the clip ports align correctly.

14/02/2020
Version 0.9

- Added the rest of Third Class

07/02/2020
Version 0.8

- Added Third Class (window only)
- Added Hull Extenders
- Added Sandcrawler
- Added State Room

31/01/2020
Version 0.7

- Added Side Engines
- Added Crew Quarters
- Added Broadside Weapons
- Updated Landing Gear to include retracted models
- Updated VTOL Engines to include round engines

27/01/2020
Version 0.6.1

- Updated Manoeuvrability Pack variants to include separate RCS thruster versions and Pathfinder compatibility
- Updated Chimera Plus to include turret port compatibility

24/01/2020
Version 0.6

- Added Chimera Plus
- Added Cargo stretch
- Added Manoeuvrability Pack
- Updated Escape Pod for more compatability
- Updated Flat Top for Skinny compatability

20/01/2020
Version 0.5.1

- Added missing Forward airlock - airlock.stl

17/01/2020
Version 0.5

- Added Chimera Skinny
- Added Escape Pods
- Added Raised Bridge

Version 0.4

- Fixed airlock door to not jam
- Added

10/01/2020
Version 0.3

- Added Airlocks
- Added Computers
- Added Angled Underside
- Added this change log

This best of pack includes a variety of our most popular items from Starship I and Starship II.

Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 50-100 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. For optimal printing, you will need to add supports, particularly for overhanging areas, such as the top of door frames.

Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.

This package includes:

• Spacesuit Locker
  Power Loader
  Lockers (based and unbased)
  Hangar Taxi
  Missiles (three variants and two missile trolleys)
  Cryo Chambers (based and unbased, standing and horizontal variants)
  Machinery (4 variants, based and unbased, including water pumps, generators and servers)

CURRENT VERSION: 1.4.6

Additional Starship III Common Stretch Goals:

• Boarding Tube
• Bonus Items
• Hard Points
• Medbay
• Revised Tactical Miniatures
• Tactical Miniatures (in 1:270 scale and 1 inch hex scale)
• Variant Miniatures I (in same scales as above)
• Workshop

Current Version: 2.0 (Delta 1700-Series) (22/12/2023)

Cruise the hyperspace lanes in this high-speed transport. Haul cargo - legal or illicit - with two massive engines to get you from point A to point B. Manoeuvre with the fluidity of repulsor technology and defend yourself with manned or unmanned turrets and a powerful shield generator.

Create your own full scale printable 3D transport craft, with modular interior and cutaway structure!

• The ship is detailed inside and out and a variety of configurations can be used to customise the deck plans
  Modular interior – customise the layout however you like using other Starship or compatible tiles
  The transport has larger parts, and requires a medium sized print bed that can fit 215mm/8.5 inches
  Contains over 80 parts
  Largest part is 176×62×140mm (7×2.5×5.5")Can be rotated to fit 156×140×140mm (6.1×5.5×5.5")
  Longest part is 215×155×35mm (6×8.5×1.4”)
  There are some additional margins if parts are rotated, etc.

Also includes all Transport Delta-related stretch goals from Starship III Kickstarter.

Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available from Printable Scenery. 

Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns and should be fully printable using PLA, ABS, PETG or PEI plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.

Parts are designed in 28mm scale (1" squares), but can be rescaled easily in your 3D printing software package.

Version: 2.6.5 - 28/10/2021

Need a way to get your units from the ground to orbit? This shuttle is fully modular and can be configured as a dropship, cargo shuttle, or even a small star ship. More than a mere deck plan, this product includes a full scale (sized to 28mm miniatures) fuselage complete with manoeuvring thrusters, sensors, landing gear and articulated main thrusters for VTOL operations.

Modular interior – customise the layout however you like using other Starship or compatible tiles
Alternate parts for large and small print beds 
High and low detail versions
Contains over 50 pieces
Low support requirements
Create your own full scale printable 3D shuttle craft, with modular interior and cutaway structure!

Also includes all Space Shuttle Alpha-related stretch goals from Starship III Kickstarter.

Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available from Printable Scenery. 

Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.

Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.

Version: 2.0 - implemented the new high fidelity exterior and interior, including 3mf print beds that you can import for easy printing. Instructions coming soon.

Modify your Scout Ship Beta or Beta Centauri to add a huge new hammerhead nose to the Beta series. This provides a huge space for a fleet command bridge or to plenty of space to further expand your starship, essentially doubling the interior volume, including the split level. Includes four additional standard turret ports (port, starboard, ventral and dorsal). Comes with an expanded bridge layout as default.

Please note that you will need the base ship to be able to build this variant.

Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available free from Printable Scenery.

These tiles are commercially available versions of 2nd Dynasty's 2019 Starship IV Kickstarter.

Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.

Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.

CURRENT VERSION: 1.0

Fully realise a medical bay or science lab aboard your vessel, space station or colony. Includes medical beds, scanners, sample storage and body scanners for diagnosing that alien parasite or collecting samples of alien flora and fauna.

Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available from Printable Scenery.

Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.

Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.

This package includes 18 high detail tiles, including:

• S and A Sample Wall storage
  S-Wall and regular wall medical operating tables
  S Specimen Tables
  Standalone large and small specemin containers
  Body scanner
  Sample Table

CURRENT VERSION: 1.1

Expand your Starship deck plans with these turret tiles, suitable for use with 28-32mm miniatures. Compatible with other 2nd Dynasty tiles or any other OpenLOCK-compatible tiles.

Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available free from Printable Scenery.

Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.

Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.

This package includes:

• cannon_launcher_turret_base.stl
  cannon_launcher_turret_bottom.stl
  cannon_launcher_turret_top.stl
  Rotary Laser Lens Turret 1.1.stl
  Rotary Laser Lens Turret.stl
  Single Auto Turret.stl
  Twin Auto Turret 1.1.stl
  Twin Auto Turret.stl
  Twin Manned Turret 1.1.stl
  Twin Manned Turret.stl
  Single Beam Cannon.stl
  Single Cannon.stl
  Single Laser.stl
  Triple Laser.stl
  Double Beam Cannon Left.stl
  Double Beam Cannon Right.stl
  Quad Cannon.stl
  Single Cannon.stl
  Single Laser.stl
  Triple Cannon Left.stl
  Triple Cannon Right.stl
  Double Beam Cannon Clip Opposite.stl
  Double Beam Cannon Clip.stl
  Laser Cannon Clip.stl
  Quad Cannon Clip.stl
  Single Cannon Clip.stl
  Single Cannon Variant Clip.stl
  Single Laser Clip.stl
  Triple Cannon Clip.stl
  Triple Cannon Large Clip.stl

This pack contains five sitting crewmembers, including a captain, pilot with and without helmet, and tech with and without helmet. Bridge furniture is also included.

Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 50-100 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. For optimal printing, you will need to add supports, and printing on a 45 degree angle will produce a smoother print.

Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.

This package includes:

• Captain Seated
• Tech Seated
• Tech Seated with helmet
• Pilot Seated
• Pilot Seated with helmet
• Pilot Seated
• Pilot Control Panel
• Tech Control Panel
• Crew Seat
• Captain's Chair

CURRENT VERSION: 1.3.4

Explore deep space and final frontiers with this full 28mm scale scout ship, designed stock-standard for long haul endurance scout missions. Includes two manned turrets for defending in rough territory, a full sensor suite package for scanning new systems, a well equipped engineering section, cargo hold, living quarters and a 5-station forward bridge.

Modular interior – customise the layout however you like using other Starship or compatible tiles
Contains over 50 pieces
Minimal support requirements
Create your own full scale printable 3D scout ship, with modular interior and cutaway structure!

Also includes all Scout Ship Beta-related stretch goals from Starship III on Kickstarter.

Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available from Printable Scenery.

Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.

Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.

CURRENT VERSION: 1.1  - Security Scanner updated

Add security stations, brigs and prison cells to your starship deck plans!

Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available from Printable Scenery.

Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.

Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.

This package includes 18 high detail tiles, including:

• Size E and size I floor turrets, articulated
  II Weapons lockers
  Cell doors
  Security doorway
  Laser door
  Security scanner
  Security control pannel

Additional files to the Collector IV Pledge, not included elsewhere.

Current Version: 1.1 - 16/09/2020

Expand your Starship deck plans with these gantry pack tiles, suitable for use with 28-32mm miniatures. Compatible with other 2nd Dynasty tiles or any other OpenLOCK-compatible tiles.

Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available free from Printable Scenery.

Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas.

Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.

Expand your Starship deck plans with these turrets pack IV tiles, suitable for use with 28-32mm miniatures. Compatible with other 2nd Dynasty tiles or any other OpenLOCK-compatible tiles.

Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available free from Printable Scenery.

Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports.

Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.

Current Version: 1.1.1

Expand your Transport Delta deck plans with these lengthening tiles, suitable for use with 28-32mm miniatures. Compatible with 2nd Dynasty's Starship Transport Delta tiles.

Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available free from Printable Scenery.

Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.

Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.

CURRENT VERSION: 1.0.8

Get the Starship Chimera STL files and all campaign stretch goals.

Includes:

Starship Chimera STL Files
Starship Chimera Stretch Goal STL Files
Non-Commercial Printing License

Current version: 1.1 - 17/09/2020

This pack contains five sitting crewmembers, including a female captain, male pilot with and without helmet, and a male tech with and without helmet.

Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. 

Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.

Current version: 1.4 - Compatible with Operation Maelstrom

Make your own customisable starfighters, combining engines, wings, weapons systems and more, suitable for use with 28-32mm miniatures. With almost 50 components, you can make a wide variety of combinations, and mix and match them with some of your favourite turret weapons from Turrets Pack I, or attach these weapon points on your existing hardpoints from Starship III!

Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available free from Printable Scenery.

Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas.

Parts are designed in 28-30mm scale, but can be rescaled easily in your 3D printing software package

Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available free from Printable Scenery.

Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas.

Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package

CURRENT VERSION: 1.0.9

Get the Starship Chimera Pathfinder, a smaller, distinct deep space exploration ship. Fully detailed interior and compatibility with other Chimera parts, but with one important caveat:

NO STRETCH GOALS INCLUDED

This is Starship Chimera Pathfinder only!

INCLUDES:

• Starship Chimera Pathfinder STL Files
• Non-Commercial Printing License

Paint and customisation by Brian Jenkins

CURRENT VERSION: 1.3.2

28 Stretch Goals unlocked during Starshp IV.

Starship IV - Common Stretch Goals - Change Log
===============================================

14/10/2020
Version 1.1

- Added bonus parts to Chimera Plus and added shared parts with the Skinny so that everything is in one folder system.

18/08/2020
Version 1.0.9

- Closets and cabinet fixed in the state room - Closets - Standalone 1.2.stl and Cabinet - Standalone 1.1.stl.
- Added unbased servers - 1x1 - I - Server - Type II - Closed - Unbased.stl and 1x1 - I - Server - Type II - Open - Unbased.stl.

11/05/2020

Version 1.0.8

- Added Outer Hull - Chimera Plus - Forward Cargo Bay Hinge - 3 Inch 1.1.stl and Wide Nose Joint.stl to the Chimera Plus to fix an issue with the cargo bay hinge and add something to cover the gap with the wider doors.

24/04/2020
Version 1.0.7

- Added 3/4 modular bulkheads to Plus and Skinny for above the engines

22/04/2020
Version 1.0.6

- Added fix for triple bunks in the crew quarters

21/04/2020
Version 1.0.5

- Added new parts to accomodate the wider Chimera Plus, and middle deck bulkhead edges. Also, 3 inch wide ramp.

13/04/2020
Version 1.0.4

- Fixed separated monitors from Raised Bridge - Upper Bridge Nose.stl in the Raised Bridge stretch
- Added missing bulkhead for engine mounts for the Chimera Plus

09/04/2020
Version 1.0.3

- Put out a fix on the middle cargo bay parts for the Chimera Plus variant that had openlock ports placed incorrectly.

25/03/2020
Version 1.0.2

- Added parts to the Chimera Plus to allow for wider hangar bay bulkheads

12/03/2020
Version 1.0.1

- Added missing cargo ramp to Plus and Skinny variants

11/03/2020
Version 1.0

- Added the ghost ship files
- Production version

20/02/2020
Version 0.9.2

- Added missing angled to flat conversion piece to the Flat Top stretch goal

17/02/2020
Version 0.9.1

- Replaced the old large turret parts with the 1.1 versions; an older version was accidentally included. The newer one has thicker mountings and the clip ports align correctly.

14/02/2020
Version 0.9

- Added the rest of Third Class

07/02/2020
Version 0.8

- Added Third Class (window only)
- Added Hull Extenders
- Added Sandcrawler
- Added State Room

31/01/2020
Version 0.7

- Added Side Engines
- Added Crew Quarters
- Added Broadside Weapons
- Updated Landing Gear to include retracted models
- Updated VTOL Engines to include round engines

27/01/2020
Version 0.6.1

- Updated Manoeuvrability Pack variants to include separate RCS thruster versions and Pathfinder compatibility
- Updated Chimera Plus to include turret port compatibility

24/01/2020
Version 0.6

- Added Chimera Plus
- Added Cargo stretch
- Added Manoeuvrability Pack
- Updated Escape Pod for more compatability
- Updated Flat Top for Skinny compatability

20/01/2020
Version 0.5.1

- Added missing Forward airlock - airlock.stl

17/01/2020
Version 0.5

- Added Chimera Skinny
- Added Escape Pods
- Added Raised Bridge

Version 0.4

- Fixed airlock door to not jam
- Added

10/01/2020
Version 0.3

- Added Airlocks
- Added Computers
- Added Angled Underside
- Added this change log

Version: 2.0 - implemented the new high fidelity exterior and interior, including 3mf print beds that you can import for easy printing. Instructions coming soon.

Modify your Scout Ship Beta or Beta Centauri to add a huge new hammerhead nose to the Beta series. This provides a huge space for a fleet command bridge or to plenty of space to further expand your starship, essentially doubling the interior volume, including the split level. Includes four additional standard turret ports (port, starboard, ventral and dorsal). Comes with an expanded bridge layout as default.

Please note that you will need the base ship to be able to build this variant.

Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available free from Printable Scenery.

These tiles are commercially available versions of 2nd Dynasty's 2019 Starship IV Kickstarter.

Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.

Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.

Current Version: 1.1 - 16/09/2020

Expand your Starship deck plans with these gantry pack tiles, suitable for use with 28-32mm miniatures. Compatible with other 2nd Dynasty tiles or any other OpenLOCK-compatible tiles.

Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available free from Printable Scenery.

Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas.

Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.

Expand your Starship deck plans with these turrets pack IV tiles, suitable for use with 28-32mm miniatures. Compatible with other 2nd Dynasty tiles or any other OpenLOCK-compatible tiles.

Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available free from Printable Scenery.

Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports.

Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.

CURRENT VERSION: 1.0.8

Get the Starship Chimera STL files and all campaign stretch goals.

Includes:

Starship Chimera STL Files
Starship Chimera Stretch Goal STL Files
Non-Commercial Printing License

CURRENT VERSION: 1.0.9

Get the Starship Chimera Pathfinder, a smaller, distinct deep space exploration ship. Fully detailed interior and compatibility with other Chimera parts, but with one important caveat:

NO STRETCH GOALS INCLUDED

This is Starship Chimera Pathfinder only!

INCLUDES:

• Starship Chimera Pathfinder STL Files
• Non-Commercial Printing License

Paint and customisation by Brian Jenkins

CURRENT VERSION: 1.3.2

28 Stretch Goals unlocked during Starshp IV.

Starship IV - Common Stretch Goals - Change Log
===============================================

14/10/2020
Version 1.1

- Added bonus parts to Chimera Plus and added shared parts with the Skinny so that everything is in one folder system.

18/08/2020
Version 1.0.9

- Closets and cabinet fixed in the state room - Closets - Standalone 1.2.stl and Cabinet - Standalone 1.1.stl.
- Added unbased servers - 1x1 - I - Server - Type II - Closed - Unbased.stl and 1x1 - I - Server - Type II - Open - Unbased.stl.

11/05/2020

Version 1.0.8

- Added Outer Hull - Chimera Plus - Forward Cargo Bay Hinge - 3 Inch 1.1.stl and Wide Nose Joint.stl to the Chimera Plus to fix an issue with the cargo bay hinge and add something to cover the gap with the wider doors.

24/04/2020
Version 1.0.7

- Added 3/4 modular bulkheads to Plus and Skinny for above the engines

22/04/2020
Version 1.0.6

- Added fix for triple bunks in the crew quarters

21/04/2020
Version 1.0.5

- Added new parts to accomodate the wider Chimera Plus, and middle deck bulkhead edges. Also, 3 inch wide ramp.

13/04/2020
Version 1.0.4

- Fixed separated monitors from Raised Bridge - Upper Bridge Nose.stl in the Raised Bridge stretch
- Added missing bulkhead for engine mounts for the Chimera Plus

09/04/2020
Version 1.0.3

- Put out a fix on the middle cargo bay parts for the Chimera Plus variant that had openlock ports placed incorrectly.

25/03/2020
Version 1.0.2

- Added parts to the Chimera Plus to allow for wider hangar bay bulkheads

12/03/2020
Version 1.0.1

- Added missing cargo ramp to Plus and Skinny variants

11/03/2020
Version 1.0

- Added the ghost ship files
- Production version

20/02/2020
Version 0.9.2

- Added missing angled to flat conversion piece to the Flat Top stretch goal

17/02/2020
Version 0.9.1

- Replaced the old large turret parts with the 1.1 versions; an older version was accidentally included. The newer one has thicker mountings and the clip ports align correctly.

14/02/2020
Version 0.9

- Added the rest of Third Class

07/02/2020
Version 0.8

- Added Third Class (window only)
- Added Hull Extenders
- Added Sandcrawler
- Added State Room

31/01/2020
Version 0.7

- Added Side Engines
- Added Crew Quarters
- Added Broadside Weapons
- Updated Landing Gear to include retracted models
- Updated VTOL Engines to include round engines

27/01/2020
Version 0.6.1

- Updated Manoeuvrability Pack variants to include separate RCS thruster versions and Pathfinder compatibility
- Updated Chimera Plus to include turret port compatibility

24/01/2020
Version 0.6

- Added Chimera Plus
- Added Cargo stretch
- Added Manoeuvrability Pack
- Updated Escape Pod for more compatability
- Updated Flat Top for Skinny compatability

20/01/2020
Version 0.5.1

- Added missing Forward airlock - airlock.stl

17/01/2020
Version 0.5

- Added Chimera Skinny
- Added Escape Pods
- Added Raised Bridge

Version 0.4

- Fixed airlock door to not jam
- Added

10/01/2020
Version 0.3

- Added Airlocks
- Added Computers
- Added Angled Underside
- Added this change log

CURRENT VERSION: 1.0.9

Get the Starship Chimera Pathfinder, a smaller, distinct deep space exploration ship. Fully detailed interior and compatibility with other Chimera parts, but with one important caveat:

NO STRETCH GOALS INCLUDED

This is Starship Chimera Pathfinder only!

INCLUDES:

• Starship Chimera Pathfinder STL Files
• Non-Commercial Printing License

Paint and customisation by Brian Jenkins