Are you searching for a solid, sturdy, well-designed wall mount for your Amazon Alexa? Did you find the other peasant wall mounts available to be beneath you? Well then my good sir, I present the fancy wall mount, made specifically for the discerning Amazon enthusiast.
This wall mount was designed high in the mountains of Tuscany. Expertly modeled, this wall mount was hand crafted by the finest Italian artisans while they were hand fed Sangiovese grapes. The finished product is a magnificent display of taste, quality, and art perfect for your villa or chalet.
Suggested print settings:
Highly detailed/High Res model best represented at a 0.1mm layer height, but quite functional and acceptable at standard 0.3mm (as pictured). The print orientation is as-modeled, with the wall mount face flat against the build plate. Limited supports will be necessary inside the decorative bracing. An 85 degree support cutoff for a few limited areas inside the print is sufficient. 20% infill is sufficient for support.
Suggested hardware for mount:
The wall mount utilizes (2) 1-1/2" #8 flat head wood screws. It is essential that the top screw head seat into the countersunk pocket to prevent binding/inability to seat. The length and type of screw (be it drywall anchors, etc.) is irrelevant, provided it is a flat head screw as visible in the preview photos.
This mount has very low tolerances, and is meant to grab your Echo extremely tight to prevent tips/falls. Because of this, the mount does not require an upper attachment point as some of the other peasant wall mounts incorporate.