Anycubic Photon Carbon Filter Tubes
Anycubic Photon Carbon Filter Tubes
Published 2020-03-23T19:13:39+00:00
I made these to fit mat_neu27's Filter System ( see Here
https://www.thingiverse.com/thing:3176504
) You can just use the internal one on its own but with the mat_neu27 filter system I used both of them and for me it works great.
Post-Printing
I used a cheap thin Carbon Cooker hood filter to line the inside of the tubes - cut to 135mm then rolled and tacked the edges together with Super Glue ( Gluing the carbon filter causes a small smoke / reaction so use small dabs and do this in a well ventilated area) - then push it in and trim the end flush with the top. AIRO Active Carbon pellets ( any active carbon should work fine ) If you are using both filters with the added EE filter system like mine I used the crappy sponge supplied with the printer - cut in half / shaped to fit tight in the bottom of the tube to hold the Carbon Pellets in place. Happy Printing
Printer brand:
Prusa
Printer:
i3 MK3
Rafts:
Doesn't Matter
Supports:
No
Resolution:
0.2
Infill:
20
Filament_brand:
REAL
Filament_color:
BLACK
Filament_material:
PETG
Notes:
Used a 10mm Brim on the tubes
| Date published | 23/03/2020 |
| Dimensioni | 0mm x 0mm x 0mm |
| Supporto Gratuito | YES |