KS2AZM05 - Aztlan Epic Foes
$9.00 KS2AZM05 - Aztlan Epic Foes
3D
Published 2021-05-07T08:17:54+00:00
Aztlan was our first original set that got developed into a full series. It was Will's baby to start, but almost all the Aether Staff have since contributed. It is also our largest tileset series, with well over 1000 models.
This latest expansion, Epic Foes, was built almost entirely by Nasos Maloudis as user requested miniatures from the Aztlan Awakens Kickstarter. These minis were the ones specifically requested by the backers, by the Administrators, and by Nasos himself for his own full vision of the The World of Aach'yn. All miniatures print without supports.
MINIATURE RECOMMENDED PRINT SETTINGS
Layer Size: 0.1mm recommended, 0.05mm for resin.
Infill: 25-35%% recommended.
Top/Bottom Layers: 8 (or 0.8mm if using a different layer size than 0.1mm)
Side Shell Count: 3 (or 1.2mm if using a different nozzle size than 0.4mm)
Raft/Brim/Supports: None
| Date published | 07/05/2021 |
| Price | $9.00 |
| Supporto Gratuito | YES |