BloomStar Habibi Board LED Grow Light Enclosure
BloomStar Habibi Board LED Grow Light Enclosure
3D
Published 2019-11-05T19:24:06+00:00
I bought a budget LED panel to grow greens in the kitchen, and didn't like the barebones desing and the lack of cooling.
A few CAD iterations later - I came up with this simple 4 part slide-in assembly that houses the original BloomStar Habibi Board, plus two additional 80mm 24v fans that I got off of amazon.
All plastic parts slide into place and are held together by M3 16mm bolts, and only a brim is required for adequate bed adhesion while printing.
P.s.
Plea$e $how $ome $upport and buy me a cup of coffee if you found this useful.
Dimensions:
Shell x2 - 62x290x100mm
Grill x2 - 37x288x20mm
Time to print at 0.2mm:
Shell x2 - ~16h
Grill x2 - ~6h
Hardware:
8x M3 16mm bolts for the fans
2x M3 14mm bolts for the top grill cover
4x M3 hook bolts
Attentiont! - This design requires a min 200x300mm hotbed!
Dimensions:
Shell x2 - 62x290x100mm
Grill x2 - 37x288x20mm
Time to print at 0.2mm:
Shell x2 - ~16h
Grill x2 - ~6h
| Date published | 05/11/2019 |
| Tempo per farlo | 20 - 25 Minuti |
| Dimensioni | 62x290x100mm |
| Supporto Gratuito | YES |