Nice! This is an excellent 3D print, you split the STL files beautifully.

Turned out great, I gave it a mat paint job to practice with my airbrush.

Tongue printed in Semi transparent PETG, rest printed in white, black, neon red, PLA. All printed 0,1mm layer height with different infills as appropriate for the part. No supports needed as long as the first layer adheres properly, and a little bit of a brim helps the first layer adhesion along.

Tongue printed in Semi transparent PETG, rest printed in white, black, neon red, PLA. All printed 0,1mm layer height with different infills as appropriate for the part. No supports needed as long as the first layer adheres properly, and a little bit of a brim helps the first layer adhesion along.

Printed on 86Duino Enjoy

Awesome model...complements my wall of Nintendo memorabilia quite nicely. I may even print a few more halves and embed them with magnets to secure to the wall/fridge/side of bookcase. I had to scale the pins to 99% to get them to fit. All parts are Atomic PLA and the tongue is Atomic PETG.

Mine...

Turned out great!!

Beautiful model!

Great print!

Printend on Prusa MK3 Prusa Mini Sapphire S

Wonderful model, thanks! Printed in Urban Grey Prusament PETG, sanded, painted with acrylics and finally sprayed with a clear coat. I aim to, eventually, print the entire party c:

Printed at 200% on a Creality CR6-SE. Easy to print, had to raise the bed temp to 100'C, slow down to 50mm/s and add support for the tongue or it would get knocked and fall over.Can't get rid of the gap between the 2 body pieces, its glued now but might try and fill/sand it at some point :)

Love it! I had trouble with printing the tongue, so I used my 3D pen and made one. Otherwise had no problems.

Printed on Elegoo Mars 2 Pro with Anycubic white/black standard resin and UV resin color pigments for the colored parts. Layer height 0.05.