Bucket Lid for Modular Hydroponic System
Bucket Lid for Modular Hydroponic System
3D
Published 2020-02-14T01:35:17+00:00 • Remixed from Modular Hydroponic System
I printed the system from @archipelagourbanfarms and opted to use a bucket I could get cheap at Lowes. I wanted to have a nice lid for stability so I tried my hand at some Fusion 360. I hope this can help someone else out there who finds themselves in a similar situation.
Part Tips:
Holes are meant for M3 hardware. I personally glued mine together only using the outer holes.
Cable hole fits a standard US 3 prong plug and is meant for the power cable from the water pump.
Print using support material for the overhang on the lid parts.
Image was printed in marble PLA:
https://www.amazon.com/gp/product/B01IIAC2MW/ref=ppx_yo_dt_b_asin_title_o05_s00?ie=UTF8&psc=1
| Date published | 14/02/2020 |
| Tempo per farlo | 2400 - 2880 Minuti |
| Dimensioni | 314mm X 314mm X 314mm |