Car Marty Accessory Port Connector
Car Marty Accessory Port Connector
3D
Published 2018-04-09T15:13:39+00:00
The ultra rare car derivative of Fujitsu's FM Towns Marty console has a bit of a weird connector to get video and sound out. The leads for this are even rarer than the console so here's a compatible connector, the pin-out is on our website at http://www.re-enthused.com.
To use it you just need to get some pins, solder the wires on then push them through the right holes. I recommend hot-gluing the pins in from the inside.
This should be fairly easy to print, but some printers may have trouble with the small holes on the pin header.
This needs to be printed fairly solid, it needs the rigidity to withstand being plugged in. Some printers might have an issue reproducing the holes in the pin header.
If you have an issue printing the guide arms, they can be cut off the model. They're just used to help the connector stay straight.
| Date published | 09/04/2018 |
| Tempo per farlo | 58 - 90 Minuti |
| Quantità di filamento | 10.9 |
| Dimensioni | 33.6 x 38.0 x 10.5 |