AEXMAS01 - Christmas
$1.00 AEXMAS01 - Christmas
3D
Published 2021-03-25T09:06:55+00:00
This set of scatter terrain was sculpted by Jacob Armour. He took the initiative to craft this set for the holidays.. We hope you enjoy these pieces and find a way to work them into your games. Thanks for downloading this set and for your support. The wonderful patrons of Aether Studios made it possible.
TERRAIN RECOMMENDED PRINT SETTINGS
Layer Size: 0.15mm minimum. 0.1mm recommended.
Infill: 10% for all models recommended
Top/Bottom Layers: 9 (or 0.9mm if using a different layer size than 0.1mm)
Side Shell Count: 2 (or 0.8mm if using a different nozzle size than 0.4mm)
Raft/Brim/Supports: None
MINIATURE RECOMMENDED PRINT SETTINGS
Layer Size: 0.1mm recommended, 0.05mm for resin.
Infill: 25-35%% recommended.
Top/Bottom Layers: 8 (or 0.8mm if using a different layer size than 0.1mm)
Side Shell Count: 3 (or 1.2mm if using a different nozzle size than 0.4mm)
Raft/Brim/Supports: None
| Date published | 25/03/2021 |
| Price | $1.00 |
| Supporto Gratuito | YES |