Christmas IPhone 5 Snowflake Case
Christmas IPhone 5 Snowflake Case
3D
Published 2014-12-16T13:30:01+00:00
I designed a case using Solidworks for the IPhone 5s/5c.
For a christmas design I decided to create the pattern of a snowflake slightly offset from the corner to keep it simple and interesting.
This case clips easily onto the phone protecting the back and the edge from scratches.
It's been designed to be a a fast and easy print - placed flat down onto the print bed.
The file will print as it is without any need for support material or any extra measures.
This case was printed using an Ultimaker 2 using white PLA - at a layer height of 0.2mm and print speed 50mm/s
Import the file into your printer software with the back facing down onto the print bed. Turn off support material and you're ready to print. The finish on the back of the case will be shinier if it is printed onto a smooth print surface such as glass, printing on masking tape or other materials will give the case more of a matte effect.
| Date published | 16/12/2014 |
| Tempo per farlo | 60 - 90 Minuti |
| Quantità di filamento | 20 |
| Dimensioni | 130mm x 63mm x 10 |
| Complessità | Very Easy |
| Supporto Gratuito | YES |
Iphone 5 Snowflake Case Printed with Dimension Delta 3D Printer. INVENTIVE 3D - "GIVING 3RD DIMENSION TO YOUR DREAMS" CONTACT US AT: Mr Mohit Sakhpara : +91 8866101225 Mr Jeval Dholakiya: +91 8000136060 Email ID: inventive3d@gmail.com Facebook: www.facebook.com/inventive3d Twitter: @3dinventive