Printed with SAN Filament. Used Cura to hollow out the interior. Two wall layers of 0.4mm each. It is perfectly watertight :-)

Spiral Mode

Printed on Leapfrog Bolt with rPLA filamentive.

Printed on Prusa MK2 with Multi Material Upgrade!

Used reclaimed pet g

Printed at .1618 layers, 90% scale. Good quality, easy print

Printed this on the CR-10s using Zyltech Wood Pla. My second print using the wood pla, first was the calibration cube beside it.

Sliced in Simplify3D, Vase Mode Layer Height: 0.2mm Material: PETG Transparent Machine: WanHao Duplicator i3 V2.1 Temp: Extruder - 235 Deg C / Bed - 80 Deg C No Fan. Print Time: @180 Minutes

fed different colours in as it was printing

it came out nice

Lovely model. Many thanks.

Printed using spiral vase mode. This came out amazing!

Awesome design!

Monochrome vase printed with red filament. Still learning about things like vase mode and spiral printing but this came out pretty nice. Only printed it 100mm high because the max my printer will go is 120 and going anywhere near the max is asking for failure and wasting filament .

Printed with Micron3DP Glass 3D Printer. Pure Soda-Lime Glass. The First Picture is 0.1mm layer height, The other two pictures is 2mm layer height but it 3D print with a twist so the model have droplets that shine more than the original.

Printed with Micron3DP Glass 3D Printer. Pure Soda-Lime Glass. The First Picture is 0.1mm layer height, The other two pictures is 2mm layer height but it 3D print with a twist so the model have droplets that shine more than the original.

I love how it looks Devin, it is a wonderful design. But im going crazy trying to how to make it in solidworks. Does anyone know how?

ABS Z : 0.4 mm Nozzle : 0.8 mm

It has taken me a while to print this in two colors. Even with my "best" calibration, I still can't get the vase to be water-tight. I am printing in ABS, with 0.2011 mm resolution, & about 30% infill. My printer is the Artifex 2 All Metal Duo.

Used Stonghero3D rainbow filament.

Amazing print

great print

Printed at 200% ran 8 hours and 43 minutes. Using a CR-10s. Printed in Stronghero3D Splendid Rainbow PLA. Print failed. On the back side there's a crack 2/3rds the way across and some stringing that I can't explain. Still, I did get a great picture and can display it :) Thanks for the model Devon!

Printed at 170% scale in vase mode. .4mm nozzle extruding at .5mm. Used Ziro Carbon Fiber PLA.

Marvelous

Play gold silk 0.16 layer height

I used Formfutura Pine Wood PLA for this one. Love it! Settings: 0.6mm nozzle, 0.25mm layer height @ 0.35mm/sec print speed (spiralize outer contours in Cura / vase mode)

What do you think about this? Printed with 0.3mm layers and "metallic" PLA!

Printed with Xinkebot Orca2 Cygnus height 35cm vase mode layer: 0.2h 0.48w 13 hours

I made this print today for the first time I printed this big (250mm tall). It came out very nice and looks smooth and shiny. But the wall is about 1mm thick, not water tight, so thin. Is it set in the Shell wall thickness option? I'm using Cura 4.1. Thanks for sharing this design.

Printed with 0.15mm layer height using Cura's spiralizing mode. I adjusted overextruding to 110% to get the vases watertight - Cura -> Material -> (Hidden Option) Flow 110%. The set is printed in 10, 15 and 20 centimeters . Thanks for the great design by the way Devin, love it!!

I just Wanted to do a test print. But it came out really nice. Wanted to see maximum size my ender 3 is capable of in real life (175%). One question pls: How could I increase the wall thickness. I am Using Cura, "Vase mode". I did set wall thickness to 2.7mm, but it is not even half this size. It is watertight though

rough turned a rosewood log, applied the STL file to a CNC machine and voila.

Gorgeous vase I love it thank you