Commodore C64 & C128 SD2IEC Enclosure
Commodore C64 & C128 SD2IEC Enclosure
Published 2014-09-10T02:19:44+00:00
This case was designed to house the Commodore SD2IEC SD card adapter that is sold online by NKC Electronics. This case will allow you to mount both the mainboard and the daughter boards to keep them protected and looking stylish!
SD2IEC is a hardware mass storage device using an SD/MMC card and interfacing with the IEC bus. It is based on the ATmega644 microcontroller from theAtmel AVR microcontroller family. The most prominent use of SD2IEC is emulation/replacement of a Commodore-1541 disk drive for a C64. Hardware and the microcontroller's sd2iec firmware is available as open source.
Print at 00.25 mm layer height, with 25% infill. This takes 294 minutes and uses 115.6 g of filament.
Date published | 10/09/2014 |
Tempo per farlo | 294 - 294 Minuti |
Quantità di filamento | 115.6 g |
Dimensioni | 93 x 104 x 46 |
Complessità | Very Easy |