Companion Cube (Portal)
Companion Cube (Portal)
3D
Published 2017-03-01T10:00:48+00:00
This was a triumph!
Feeling guilty about incinerating your companion cube? While this won't replace it, it's a close second!
We do what we must, because we can.
If you print/finish/paint/put it on your pets' head/etc, tag us in it, we'd love to see it! We're on social media, check out our profile for the links!
This model is per MyMiniFactory's site terms and conditions for use. The model/prints produced with said model are for personal use and are not to be used for resale or commerical use of any kind without our permission.
This is inspired by Portal. Portal is copyright Valve. We love them, go buy their games on Steam! If you don't have Steam, google it and install it right now!
| Date published | 01/03/2017 |
| Tempo per farlo | - 220 Minuti |
| Quantità di filamento | 75 |
| Dimensioni | 63.5mm x 63.5mm x 63.5mm |
| Tecnologia | FDM |
| Complessità | Medium |
My first print from MMF, have to say I'm happy with it. Printer: Ender 3 Material: PLA Slicer: Cura Total print time: 4 Hours, 17 Minutes. Only issue I had was with the top (final layer) and bottom (base layer), but I'm fairly confident this is more to do with the cheap PLA I'm using. It struggles to adhere, no matter what I do. Overall results were good though!