Mount and fan duct for the screw mount version of the Slice Engineering Copperhead. Designed for and tested on an Ender 3 hotend carriage so should fit all machines that utilize the same or compatible carriage as it. Duct could handle 80+ degree overhangs when tested with PLA and correctly positioned. M3 heatset inserts are used to secure a probe mount if needed. An STL file to mount an M8 inductive/capacitive probe is provided, probes and sensors of any other kind will need mounts modelled for them. STEP files are included for reference and modification.
Required Parts and Hardware:
Slice Engineering Copperhead with a Screw Mount heatsink
5015 Blower Fan
2x M3x10 Screws, to secure the mount to the carriage.
2x M3x8 Screws, to secure the 5015 fan to the duct.
2x M2.5x6 Screws, to secure the hotend to the mount.
(If using a probe and/or the included M8 probe mount)
2x M3x5.7mm Heat Set Inserts
2x M3x6 Screws
Copperhead Model: https://www.sliceengineering.com/
X carriage: https://github.com/Creality3DPrinting/Ender-3
2510 Fan: https://grabcad.com/library/25-mm-fan-25-x-25-x10-1
5015 Fan: https://grabcad.com/library/radial-cooling-5015-fan-50mm-dc12v-1