Doomhammer
Doomhammer
3D
Published 2020-10-02T11:14:47+00:00
Project sculpted on stream over at https://www.twitch.tv/alexcoman .
Made especially for cosplay, the Doomhammer can be printed at human scale. For a male at 185 cm height, I suggest all parts to have 800% scale. You can adjust to your height what scale you want. You can also print it smaller if you want it as a display piece.
YOU WILL NEED TWO PART EXPOXY RESIN to glue the parts together if you chose to print it by parts. Sorry for the caps but I just wanted to make sure everyone who starts printing it sees it.
You can add lights inside since I sculpted it both from the outside and on the inside so the LED's shine only through the cracks, there is a photo of that too.
For me, at 800% scale, the prints took around 1 week and a half to finish. It's not an easy print.
I've included photos of the print, of a render + suggested print orientation for the stone parts.
Please let me know if you like it by hearting it and leaving a comment. Drop a follow if you'd like to see more prints.
I will finish the base you see in the render of the cover photo and upload it in the near future.
| Date published | 02/10/2020 |
Great Model and easy to print and assemble (i used hot glue). At first I wanted to add LED, but after painting it would not glow through the paint. Working on a wall mount right now to hang it up my gallery :-)