ENDER 3 V2 Z-LEAD SCREW KNOB
2,748
views
261
downloads
9
collections
0 comments
Loading comments... 
ENDER 3 V2 Z-LEAD SCREW KNOB
3D
Published 2020-09-02T16:25:14+00:00
56
0
Add to Collection
Description
This is a Knob for the Z-lead screw, following the design of the extruder knob found on the Ender 3 V2. The diameter for the hole was 8 mm. The final outcome was a pretty tight fit for the Ender 3 V2 lead screw.
I printed with the top on the build plate, which needed less supports at the expense of the finish. Supports will need to be pried off with needle-nose pliers. Printing time is approx. 2 hours.
Licenza
Printing Details
MATERIAL: ESUN PLA+ WHITE
SLICED WITH CURA 4.6.2 and printed with the Ender 3 V2
SHELL
- Layer Height - 0.2 mm
- Wall Thickness - 1.2 mm
- Wall Line Count - 3
- Top Thickness - 1.4 mm
- Top Layers - 7
- Bottom Thickness - 1.4 mm
- Bottom Layers - 7
- Horizontal Expansion - 0 mm
INFILL
- Infill Density - 20%
- Infill Pattern - Grid
MATERIAL
- Printing Temperature - 206 Deg C
- Printing Temperature Initial Layer - 208 Deg C
- Build Plate Temp - 60 Deg C
- Build Plate Temp Initial Layer - 65 Deg C
SPEED
- Print Speed - 50 mm/s
- Initial Layer Print Speed - 15 mm/s
TRAVEL
- Enable Retraction - Yes
- Retraction Distance - 7.5 mm
- Retraction Speed - 45 mm/s
- Combing Mode - Not in Skin
COOLING
- Enable Print Cooling - Yes
- Fan Speed - 100%
SUPPORT
- Support Placement - Everywhere
- Support Overhang Angle - 55 deg
- Support Pattern - ZigZag
- Support Density - 12%
- Support Z Distance - 0.2 mm
- Support Top Distance - 0.2 mm
Support Bottom Distance - 0.2 mm - Support X/Y Distance - 0.8 mm
- Enable Support Interface - Yes
- Support Interface Thickness - 0.8 mm
- Support Interface Density - 80%
- Support Roof Density - 80%
- Support Roof Line Distance - 0.5 mm
- Support Floor Line Distance - 0.5 mm
- Support Interface Pattern - Concentric
BUILD PLATE ADHESION
- Build Plate Adhesion Type - Skirt
- Skirt Line Count - 2
- Skirt Distance - 10 mm
Technical Information
| Date published | 02/09/2020 |
| Tempo per farlo | - 120 Minuti |
| Quantità di filamento | 11 grams |
| Dimensioni | 50 mm x 48 mm x 22.7 mm |
More Information
Object Parts