Excelsior Delta - Tilt-rotor EDF tricopter
Excelsior Delta - Tilt-rotor EDF tricopter
3D
Published 2016-03-15T17:32:41+00:00
Okay, this one's just kind of crazy. It's loud, inefficient, and persnickety. You only get about 3 minutes of flight time from a 2200mAh 3S battery. So if that's your bag, this is an aircraft for you!
It uses the top & bottom build plates (and modified cleanflight firmware) from Excelsior Bravo. (http://www.thingiverse.com/thing:825920)
EDFs are EDF55 with H300 Motor from HobbyKing
ESCs are Afro 20A
Battery (as shown) is 2200mAh 3S. (May not be the best choice.)
Cross tube is ~124mm
Rear tube is ~200mm
If you build one, God have mercy on you. :-P
https://www.youtube.com/watch?v=OetzGroOP3w
Update- It seems to fly better with a 1600mAh 4S battery:
https://www.youtube.com/watch?v=Hd24_7lb88g
Instructions
Use nylock nuts on the EDF mount rings, and don't tighten them down all the way. (Doing so flexes the housing enough to make the impeller bind.) I backed each one out until the impellers didn't scrape.
| Date published | 15/03/2016 |
| Tecnologia | FDM |