Female Witch - FREE
Female Witch - FREE
3D
Published 2022-04-04T08:47:03+00:00
From the Gaz Minis Patreon
You can check out more of my work on
Twitter and Instagram
A playful witch, can be used in fantasy or DND.
Comes supported and test printed in 30mm and Large (roughly 180-200% Bigger) with and without supports
Terms of Service
All characters portrayed are 18 and over
Scale disclaimer
Scale can sometimes be off, I try to be consistent across all my minis but I would highly recommend you check and tweak the scale to match what you need.
Pre-supported Disclaimer
MCB3D is not liable for any print failures. I have personally test printed and optimized supports, I have some amazing helpers who also test print on multiple different printers. But it's impossible to factor in every printer and climate on the planet. If you are very familiar with your printer, environment and supporting minis, I would recommend creating your own supports.
Intellectual Property
MCB3D is the sole owner of the STL files and their derivatives. The STL files are copyrighted work belonging to MCB3D
You may not Resell, re-distribute, or share our digital products as-is or where the resource can be extracted, nor use portions of our files to create new ones. You may not resell derivatives (e.g. physical prints) of our digital products unless you possess a Commercial Use License that is granted by MCB3D
alone - see below.
You may not use the resources in mass commercial production, meaning no moulds and/or casting of the printed models.
You may only use the content provided by us (imagery, digital files, and their location links) for personal use, and you are not allowed to distribute or sell them nor the prints. (See exclusions below).
All copyrights belong to MCB3D, NO rights are assigned or transferred to the end-user. Our files, designs, and imagery are protected by intellectual property laws.
Any theft, redistribution, resale, imitation, licensing, leasing, or claimed ownership of MCB3D's copyrighted brand and materials will be considered a breach of this contract, an infringement of copyright law, and dealt with accordingly in keeping with The Copyright, Designs and Patents Act 1988
| Date published | 04/04/2022 |