finger skis
finger skis
3D
Published 2014-11-18T23:05:48+00:00
These finger skis are simple and a good way to entertain yourself while bored at the office, or want something fun to do.The .stl file only has one ski, so you have to print two of them separate or place two of them on your slicer of choice before slicing it. The skis slide onto your fingers easily, and if you have the right size they should slide off easily as well. The ski sizes refer to the opening for your finger, all the skis are the same length. The small sized ski has a finger opening 18mm wide, medium has an opening 19mm wide, and the large has an opening 21mm wide.
Print at 0.2 mm layer height, with 20 % infill. This uses 14 g of filament and takes 75 minutes.
| Date published | 18/11/2014 |
| Tempo per farlo | 60 - 80 Minuti |
| Quantità di filamento | 14g |
| Dimensioni | 114mm x 22mm x 23mm x |
| Complessità | Very Easy |