Now With Hats! - Frog Guiro - Instrument
Now With Hats! - Frog Guiro - Instrument
3D
Published 2020-05-10T04:45:13+00:00
A frog-shaped guiro. Available with and without a bowtie. Rub the stick along the bumps on its back and it will "croak" like a frog. The sound is surprisingly good and works best if the stick is wrapped with a thin cloth or paper towel. I have also included two hats, a cowboy hat and a beret. For an easy press fit, print 2% larger than the frog. (i.e. 82% hat for an 80% frog) Hat models are not mine, I just fit them to the frog. Everything else is handmade by me.
Cowboy Hat: https://www.thingiverse.com/thing:1709802
Beret: https://www.thingiverse.com/thing:2874519
Printed three times without issue. Interior prints well with a few sparse tower supports. These can be easily removed with a stick or left in; they don't affect the sound much. Printing with full supports inside can and has been done, but be prepared to put some work into removing them.
| Date published | 10/05/2020 |
| Quantità di filamento | Default size uses about 100g |
| Dimensioni | 106mm x 76mm x 170mm |