This is the full printable version of the camera dolly and it is modular as well. Can be printed on small printers that has a max of 8cm^3 print volume.

The idea here is to make use of 3d printers that can make new items and this dolly also from a conventional (not so easy to source) parts.

This design are made to be fully modular style so that if one of the parts broken, you can just print that broken parts away without the need of printing a large object just to replace them.

https://youtu.be/oM_nrLxyOFw

File name with "UNI"

These are the templates for those who wants to incorporate their own mount into this design without the need to replicate the whole thing again.

The "uni mount.stl" is the only thing you would want to incorporate your design to and the radius of the cylinder is 19mm. It has been extruded by 5mm more than the adapter to make it stand out so that you guys are able to just stick something on it with merging your designs with my "uni mount.stl"

BOM

• Nut x 7
• Wingnut x 2
• Square bushing x 2
• Adapter screw x 2
• Axle screw x 2
• Axle x 2
• wheel x 4
• Wheel nut x 4
• End frame x 2

Prepping the wheel

Find any of your favorite foam double sided tape and wrap them all around the wheel.

Once the foam has been stick to the wheel, open the other side and slowly roll it on your hand or any surface to deplete the stickiness or glue of the outer side that has been exposed.

This is to create a small grip on the wheel when pushed.