Ghostbusters - extra Small proton pack
Ghostbusters - extra Small proton pack
Published 2019-11-22T12:35:40+00:00
A small toy like version of the well known ghostbusters proton pack.
it's a movie accurate easy to print version at 50% scale.
UPDATE : added a 60% protongun for older kids.
it's made to be sturdy for kids to play with, so some parts are molded to the frame.
You need :
- glue
- 4 screws
- some red, blue, green and yellow filaments for the cables.
- two magnets 30mm x 10mm x 4mm for the gun to hold on the pack
- a ribbon cable ( I used a old ide hard drive ribbon cable)
- black OD 13mm split-less loom
- two straps form an old backpack
- and if you want to do it compfy, foam to glue on the back.
there are 4 screw holes on the back to screw and glue the backpack straps.
You can find the stickers online to print at 50% scale to add more details.
If the gun is a bit small for your kids use de files with 60 in the name.
The model is free but feel free to hit the support button if you like it and thanks for your support!
you should be able to print it without a lot of support. you'll know what you can print depending on your printer.
I only used support for the gun "led" that stick out too much.
Date published | 22/11/2019 |
Printed hollow in Black PLA+ with 4 perimeters to give some strenght. Painted, added some cables with a pla pen, Orange fiber cptic cable with a Led, 2 AAA batteries and a button arranged in the body of the Proton gun