GoggleBox - spectacles case
GoggleBox - spectacles case
Published 2021-01-06T15:41:09+00:00
This is a two part case to store your glasses. There is a thumb tab on the rear of the case that unlocks the lid so that the case can be opened.
The shape of the case ensures that the lens of the inserted glasses has minimal contact with the walls and that it can be printed without supports.
The case will accomodate spectacles with a maximum height of 36mm and a folded length of 145mm.
Printer: Ender 3
Nozzle: 0.4mm
Resolution: 0.20 mm
Speed 50mm/s
Material: PETG
Nozzle Temp: 240°
Bed Temp: 70°
Infill: 15%
Walls: 5
Top Layers: 4
Bottom Layers: 3
I used 5 walls on this object to ensure a solid 3mm wall. Total print time is 8 hours 15 minutes for both sections. Print with the latch mechanism face on the print bed.
Date published | 06/01/2021 |
Quantità di filamento | 95 grams |
Dimensioni | 150mm x 53mm x 45mm |
Supporto Gratuito | YES |