Heavy Loader
Heavy Loader
3D
Published 2020-05-16T12:59:42+00:00
[Heavy Loader]
Printable Construction Action Figure
Assembly is required.
Assemble instruction is in my youtube channel
How it's made
The parts are designed and tested to fit each other, however the tolerance is depends on a 3d-printer's condition.
Please remove the supports completely. May need a sandpaper or cutter while assemble the parts.
Use a raw 1.75mm filament and super glue while assemble the parts.
The Heavy Loader is designed for ANDROID PROTOTYPE P-01
https://www.myminifactory.com/object/3d-print-android-prototype-p-01-100697
The seat might fit with other 6" action figures.
The object tested by FDM 3d printer with PLA and ABS filament.
Layer height:
0.18mm
0.10mm (Knee_Elbow_pins_Group.stl, Knee_Elbow_pin.stl)
Shell count: 3
Fill density: 15~20%
Time to do: about 9000 - 9900 minutes
Technology: FDM
Material: PLA or ABS
Dimensions: about 230mm x 270mm x 180mm
Material Quantity: about 1000g
| Date published | 16/05/2020 |
| Tempo per farlo | 9000 - 9900 Minuti |
| Quantità di filamento | 1000g |
| Dimensioni | 230mm x 270mm x 180mm |