Before you start
• Clean all prints, this is a tight-fitting assembly and you may need to file/sand to ensure proper fitment.
• I recommend that you install the volcano into the hemera before starting along with the heater and thermistor cartridges. (you should also double check your gears aren’t defective, find e3d’s youtube video for instructions)
• Ball-end 2mm allen (or 2.5mm if you’re using socket cap head instead of button head)
• Soldering iron for inserting threaded heat inserts.
May be necessary tools/supplies:
• Super glue
M3 screw lengths qty
M2 lengths qty
M3 threaded inserts 8
M2 nuts 2