Huts for Conan Boardgames and other dungeon crawlers
Huts for Conan Boardgames and other dungeon crawlers
3D
Published 2019-02-05T17:17:59+00:00
These are models for Huts and palisade obstacles in Monolith's Conan boardgames. There are several versions of each.
The hexagonal huts are separated into one side sections which have versions for a wall, a broken wall, a door, and a wall that can be positioned at a concave angle.
The round stone hut pieces are one sort each since they cannot be wrecked like others. There is a round roof that sits atop the three wall sections which holds them together nicely. The notch on the roof orients with the door to make finding the peg placement easier.
The wooden pen pieces form one of the square buildings on the map and come in door, wrecked, and wall versions.
Lastly there is the palisade which can be printed and be set up on the interior sections of the map with palisade sections to help with the LOS determination.
The "Hut Door" piece is the cloth depicted on the map board and sits on pegs on the door pieces.
Almost all of these pieces come in three flavors. Material A, Material B, and Combined. If you have a dual material printer you can print Material A and B superimposed on each other to create a nice effect. Depending on your printer you may need to tweak the models slightly. If you have a single material printer then you can ignore the A and B models and stick with the Combined versions.
Everything is already sized to fit the map fairly accurately. They can be printed without rafts or supports. In fact i'm using the bridging and unsupported sections of the models to contribute to the "shabby hut chic" that's depicted on the map.
| Date published | 05/02/2019 |
| Supporto Gratuito | YES |