Hyrule Royal Family Crest LED Sign/Lamp
Hyrule Royal Family Crest LED Sign/Lamp
3D
Published 2021-06-01T09:03:34+00:00
The body/outline as well as the back cover/plate are split into pieces that fit the bed on a Prusa i3MK 3. I've also included the body/outline and back cover/plate as a whole in case someone has a huge printer that can accommodate the whole thing or perhaps to break it down into smaller pieces.
The pieces of the Outline/body and back cover/plate are split and should fit together like a puzzle and feel sturdy after being reinforced with super glue. The underside of the body/outline has channels so one can run an LED strip all the way around. I purchased a 20-foot RGB LED strip from Amazon and after wrapping it all the way around the inside, I still had about 2 feet left.
The back cover and body/outline have holes to screw everything in. This will make the whole thing sturdier.
I used Sunlu PLA White for the Diffusers and the back plate/cover. The body/outline was printed with Do3D Silk Metallic Black Gold PLA. If using Prusa Slicer, remember to enable "Detect Thin Walls".
The diffusers will be pressure fitted into the outline/body but can still be pushed out quite easily in case you don't have RGB LED strips and want to print them in different colors.
Also, there is an included wall mount that attaches easily to the back pannels.
| Date published | 01/06/2021 |
| Supporto Gratuito | YES |
Material: Prusament Galaxy Black PETG(240°C/90°C) ERYONE White PETG (240°C/90°C) Outlines @ 0.2mm Diffusers @ 0.2mm & 110% flow LED: Lepro LE 5M Dimmbar LED Strip Set, Coldwhite, Dimmable, 12V