AEICCV0 - Ice Caverns - Starter Set
AEICCV0 - Ice Caverns - Starter Set
3D
Published 2021-07-26T08:33:24+00:00
Aether Ice Caverns are the brainchild of Károly “Carl” Csúrgó. It was a set that was highly requested by our patrons. Carl directed the construction of this series based on the requests we got from our patrons on discord. This starter set includes the most basic models needed for construction.
All the basic tiles you need to get started: Floor, Straight Wall, Curve Wall, Corner Wall, Corner Post, and Entryway are included.
TERRAIN RECOMMENDED PRINT SETTINGS
Layer Size: 0.15mm minimum. 0.1mm recommended.
Infill: 10% for all models recommended
Top/Bottom Layers: 9 (or 0.9mm if using a different layer size than 0.1mm)
Side Shell Count: 2 (or 0.8mm if using a different nozzle size than 0.4mm)
Raft/Brim/Supports: None
| Date published | 26/07/2021 |
| Supporto Gratuito | YES |