LED chandelier / lamp
LED chandelier / lamp
3D
Published 2018-02-15T12:33:04+00:00
Looking for a chandelier or lamp that will really stand out? Then why not print one?! The main part of this lamp prints in 2 pieces and is joined using 4 M3x12 screws and 4 M3 nuts. It uses 12 3/8" wooden dowels to connect the LEDs, they usually come 36" long so cut them in 3 pieces. There are pictures showing how to add the LEDs, I havent finished the wiring but i will update it later. drill a hole at the bottom of the redbull can with a 3/4" drill bit to fit the LEDs and cut the top half off. There is an stl for a base that takes a 1" PVC pipe to use this as a lamp. I will work on a way to hang it from the ceiling soon. If there are any issues or questions please let me know!
Print in PLA at .2mm layer height, 20% infill, and use supports for the 2 core pieces.
| Date published | 15/02/2018 |
| Tecnologia | FDM |
| Complessità | Easy |