Part 6 of 8
PART ONE CAN BE FOUND HERE
PART TWO CAN BE FOUND HERE
PART THREE CAN BE FOUND HERE
PART FOUR CAN BE FOUND HERE
PART FIVE CAN BE FOUND HERE
Over the next 8 lessons I will be showing you how to reproduce the « Object 260 » tank on your home printer.
I will include detailed part lists and assembly instructions plus videos of different stages during the manufacturing, assembly and finishing of the tank.
The tutorial will cover :
Printing the individual parts
Post preparation of printed parts
Painting and finishing
If you follow this tutorial you will end up with a scaled version of the Object 260 and probably a headache from the repeated « Casatchock » music in each video. If anybody has difficulties or needs advice please contact me through MMF studios, I will be more than happy to help.
Part name Description Qty
TR01 Track section 140
Printing the tracks
Start by printing 2 pieces. This will allow you to test fit them together before printing the 140 pieces needed, scale in the X,Y or Z axes if adjustment is needed and print new test pieces. You could mix and match 1 standard piece and 1 scaled piece if needed.
Once you are happy with the fit you can print all the pieces I could print half the required parts in one go. 70 pieces
Layer height 0,2mm
Top, bottom and side layers 3
Download the PDF file for more details
Object 260 Lesson 6 from Reg Taylor on Vimeo.