Littlejack Airship SOA
Littlejack Airship SOA
Published 2020-07-06T23:09:58+00:00
Well I finally finished my Littlejack airship model
from Skies of Arcadia.
A very simple guide to help assemble the model.
LJ_assembly_guide.pdf
I have tried to make it as easy as I could to print and reduce as much support material needed as possible.
Check print settings for method I used to print each part.
Below is the print settings I used for each part.
All settings are recommended settings only.
Part file name: LJ_anchor.stl
Layer height: 0.15mm ( this can be done in 0.20mm as well)
Supports: No
Raft: No
How many
to print: 1
========================================
Part file name: LJ_cannon.stl
Layer height: 0.15mm ( this can be done in 0.20mm as well)
Supports: No
Raft: No
How many
to print: 6
========================================
Part file name: LJ_fin.stl
Layer height: 0.15mm ( this can be done in 0.20mm as well)
Supports: Yes (build plate only)
Raft: Yes ( 2 layers)
How many
to print: 4 (I recommend printing one at a time)
========================================
Part file name: LJ_flag.stl
Layer height: 0.15mm ( this can be done in 0.20mm as well)
Supports: Yes
Raft: Yes (2 layers)
How many
to print: 1
========================================
Part file name: LJ_flap_01.stl
Layer height: 0.15mm ( this can be done in 0.20mm as well)
Supports: Yes
Raft: No
How many
to print: 1 ( has both needed items in the one model file)
========================================
Part file name: LJ_flap_02.stl
Layer height: 0.15mm ( this can be done in 0.20mm as well)
Supports: No
Raft: No
How many
to print: 1 ( has both needed items in the one model file)
========================================
Part file name: LJ_harpoon_cannon.stl
Layer height: 0.15mm
Supports: Yes
Raft: No
How many
to print: 1
========================================
Part file name: LJ_main_hull_01.stl
Layer height: 0.15mm ( this can be done in 0.20mm as well)
Supports: Yes
Raft: No
How many
to print: 1
========================================
Part file name: LJ_main_hull_02.stl
Layer height: 0.15mm ( this can be done in 0.20mm as well)
Supports: Yes
Raft: No
How many
to print: 1
========================================
Part file name: LJ_pins.stl
Layer height: 0.15mm ( this can be done in 0.20mm as well)
Supports: No
Raft: Recommended but up to printer
How many
to print: 1 ( has both needed items in the one model file)
========================================
Part file name: LJ_sail_01.stl
Layer height: 0.15mm
Supports: Yes
Raft: Yes
How many
to print: 1
========================================
Part file name: LJ_sail_02.stl
Layer height: 0.15mm
Supports: Yes
Raft: Yes
How many
to print: 1
========================================
Part file name: LJ_sail_03.stl
Layer height: 0.15mm
Supports: Yes
Raft: Yes
How many
to print: 1
========================================
Part file name: LJ_stand.stl
Layer height: 0.2mm ( this can be done in 0.15mm as well)
Supports: No
Raft: No
How many
to print: 1
========================================
Part file name: LJ_vent_pipe.stl
Layer height: 0.15mm ( this can be done in 0.20mm as well)
Supports: No
Raft: No
How many
to print: 1
========================================
Date published | 06/07/2020 |
Tempo per farlo | 1080 - 1081 Minuti |
Quantità di filamento | 200 |
Dimensioni | 240x140x50 |
Finally finished this project after working on it for countless hours! Thank you so much for creating and sharing the 3D print file!!!