Mini Lathe - Mini Torno
Mini Lathe - Mini Torno
3D
Published 2019-04-15T18:13:47+00:00
This design was made just for demonstration, this mini-lathe was not made to machine any type of material.
The Lathe Chuck used in this project was made by bobwomble, the link to download it is this one:
https://www.thingiverse.com/thing:624625
Approximately 700g of filament was spent for all the pieces, I used PLA for printing and a 0.6mm nozzle with 0.4mm of layer height.
You must print this quantity of parts:
1 x Base Carro Orientável
1 x Cabeçote
1 x Carro Orientável
3 x Manipulo
4 x Base Guia Linear
1 x Base Longitudinal
1 x Carro Transversal
1 x Carro Longitudinal
1 x Castelinho Superior
1 x Castelinho Inferior
Based on my project, I also used these other materials:
8 608ZZ Ball Bearings
12 LM8UU
22 M8 Nuts
Threaded Rod M8:
1 Piece with 450mm
1 Piece with 250mm
1 Piece with 200mm
Linear guide 8mm:
2 Pieces with 400mm
2 Pieces with 190mm
2 Pieces with 120mm
1 Hex Bolt M8x20
2 Hex Bolts M8x60, 1 for Castelinho and the other for lathe chuck.
8 Allen Bolts M5x30
8 Allen Bolts M3x16
3 Allen Bolts M3x50
12 M3 Nuts
My youtube channel:
https://www.youtube.com/c/NicolasExposito1
Assembling:
https://www.youtube.com/watch?v=1O6DiLc_5wg
20% Infill
Printed in PLA
| Date published | 15/04/2019 |
| Tempo per farlo | - 500 Minuti |
| Quantità di filamento | 400g |
| Tecnologia | FDM |