multi-coloured rainbow.
multi-coloured rainbow.
3D
Published 2020-04-07T17:00:14+00:00
A nice rainbow to place in your window to help cheer those around.
Printed in 7 parts, the stl files are named in the order they should be printed.
as each colour is printed you change the filament then print the next colour, leaving the previous print on the bed.
When all 6 colours are printed you print the white, which printed over and around the colours to make the item 1 part.
Your settings should be
0.2mm layer (colours are 2 layers) 0.4mm high
Zhop 0.6mm this allows the nozzle to miss the parts already printed.
To print you need to follow the instructions below.
All the parts need to be in the same orientaion on the print bed.
You have to print each ring 1 at a time and leave the finished rings on the bed for the next ring to print. Print the STL files in the order 1 to 7 with 7 being the surround top of the rainbow
The parts should be placed on the build plate and printed 1 at a time.
Build plate position x , y , z
1st-inner-ring-4mm.stl. 0 , 25 , 0
2nd-ring-5-4mm.stl. 0 , 20 , 0
3rd-ring-4-4mm.stl. 0 , 15 , 0
4th-ring-3-4mm.stl. 0 , 10 , 0
5th-ring-2-4mm.stl. 0, 5 , 0
6th-outerring-4mm.stl. 0, 0, 0
7th-rear-cover.stl. 0, -2.5, 0
| Date published | 07/04/2020 |
| Supporto Gratuito | YES |