WARNING: don't print this in PLA - it will droop in the heat over time.
Clip on horizontal phone mount for a Nissan Leaf center console. Clips on to the top right corner.
There are two design options:
1) 156 mm wide horizontal phone with optional slide on "stabilizer" hook. Works well for my Samsung J5 phone.
2) 160 mm wide horitontal phone with no stabiliser hook.
Note: After 1 month in the sun my PLA print had warped a bit. I recommend using a different filament with a higher "glass transition" temperature (for PLA that is around 50-60 degrees C - the point at which it begins to soften). For example ABS softens at around 90C.