Pop Pop Catamaran 250ml Can
Pop Pop Catamaran 250ml Can
3D
Published 2018-02-08T11:28:26+00:00
My entry for the Esso challenge !
It's a pop-pop boat, the 250ml can has be used to make the floats of the catamaran.
The boat move thanks to an "pop-pop" steam engine, i have made two version of the boiler, for the first you need to glue a sheet of aluminium with epoxy glue, the second boiler dont need glue.
The two version of the boiler work, but the difficultie is to have a good sealing between the aluminium sheet and the boiler.
You can see the engine work here : https://www.youtube.com/watch?v=Og3WMr8rtwk
(I'm sorry if my english are bad..i'm a French Maker..! Do not hesitate if you have any question on the boat !)
The light blue parts was printed in pla, the boiler need to be print in abs or another material with good heat resistane (here it's Colorfabb XT)
| Date published | 08/02/2018 |
| Tempo per farlo | 6 - 12 Minuti |
| Dimensioni | 160x90x60 |
| Tecnologia | FDM |
| Complessità | Easy |