PPE Face Shield Print in 35 minutes
PPE Face Shield Print in 35 minutes
3D
Published 2020-05-05T08:55:15+00:00
DPI Face Shield that can be printed in about 35 min. with less than 5 mt. of filament.
Light, Flexible and more comfortable than other models.
The elastic band are attached by an adapter that can be used with any elastic band up to 20mm wide, if You don't have a standard elastic band can be used an hemostatic band for the job.
Nozzle: 0.4
Perimeters: 3 at 0.6mm
Inflill : 0
Layer: 0.3mm
Speed: 50mm/sec
In my case, Temp: 210c, Bed:55c
Printed With: ColorFabb PLA Economy Light Grey
In addition to the high resolution .stl files I have also attached the .step file of the frame and the PDF of the PET screen
Added Frame-V10-2X-WH.stl with more room from face to shield to be comfortable with big face masks. The frames have same mount hole path can be swapped on the PET screen without any change.
Support the fight against COVID-19
Nozzle: 0.4
Perimeters: 3 at 0.6mm
Inflill : 0
Layer: 0.3mm
Speed: 50mm/sec
In my case, Temp: 210c, Bed:55c
Printed With: ColorFabb PLA Economy Light Grey
| Date published | 05/05/2020 |
| Tempo per farlo | 35 - 40 Minuti |
| Quantità di filamento | 15 grams |
| Dimensioni | 240x200 |
| Supporto Gratuito | YES |